Heating with air and geothermal heat - Viessmann

82/83Optimally matched for use withheat pumpsViessmann system solutions from one singlesource make optimum use of the energycaptured by a heat pump. For example, thereare suitable DHW cylinders especially for heatpumps, that are specifically designed for therequirements of detached and two-familyhomes when using a Vitocal 350, 300 or 200.DHW convenience that's as individualas you areSome DHW cylinders are prepared for theconnection of a solar thermal system or theinstallation of one or two additional electricheaters with up to 6 kW output for boostingthe DHW temperature.Strong inner valuesViessmann's product range includes theVitocell 300 and Vitocell 100 product groups.All Vitocell 300 cylinders are made of stainlesssteel and meet the most stringent hygienerequirements. It is no coincidence thatstainless steel is also used for its anti‐bacterialproperties in the food processing industry, inkitchens and in hospitals.Squeaky clean: The Vitocell 300DHW cylinders are made ofstainless steel – a materialthat meets the highesthygiene standards.Alternatively, the inner surfaces of theVitocell 100 are lastingly protected againstcorrosion with the proven Ceraprotect enamelcoating. All DHW cylinders are fully equippedwith high grade insulation against heat loss.Internal indirect coils, drawn low down tothe cylinder floor, enable quick and energyefficient heating of the entire cylinder content.Viessmann DHW cylinder Vitocell 100-V:Perfectly designed for use with heat pumps