ENGLISH - Dentsply

Section 6: BOBCAT ® Pro Ultrasonic Scaler Description cont’d6.4 Cavitron ® 25K Ultrasonic InsertsThe many styles of Cavitron ® 25K TM Inserts are easily interchangeable for various procedures and applications.See enclosed booklet for specific information.O-RingProvides seal for handpiece coolant.O-Ring should be replaced when worn.Connecting BodyTransfers and amplifies mechanicalmotion of stack to insert tip.Insert TipShape and size of tipdetermines access andadaptation. Preheatedwater directed to tip.Finger GripInsert MarkingManufacturer, Date (YYMM),Frequency, Insert Type. Tip Shape,Tip Lot Number (if applicable)e.g. DENTSPLY 9608 25K FSI-SLI-10SMagnetostrictive StackConverts energy provided bythe handpiece into mechanicaloscillations used to activatethe ultrasonic insert tip.Hold the handpiece in an upright position. Activate the foot control to bleed with water any air bubbles that might be trappedinside the handpiece. Lubricate the rubber o-ring on the insert with water before placing it into the handpiece. Fully seat insertwith a gentle push-twist motion. DO NOT FORCE.6.5 Foot Control Information & OperationThe following operating characteristics apply when using your Cavitron BOBCAT Pro Ultrasonic Scaler with CavitronUltrasonic Scaling Inserts and the PEC-2 Endosonic Insert.Foot Controldepressed...Foot Controlreleased...The ultrasonic insert tip isactivated and irrigating water.Both ultrasonic activationand irrigating flow stop.NOTE: Water may drop from insert tip after deactivation of foot control frompressure in handpiece.ENGLISH • 7