On-The-Vehicle - aesco

Owner’s ResponsibilityTo maintain machine and user safety, the responsibilityof the owner is to read and follow these instructions:• Follow all installation instructions.• Make sure installation conforms to all applicableLocal, State, and Federal Codes, Rules, andRegulations; such as State and Federal OSHARegulations and Electrical Codes.• Carefully check the unit for correct initial function.• Read and follow the safety instructions. Keepthem readily available for machine operators.• Make certain all operators are properly trained,know how to safely and correctly operate theunit, and are properly supervised.• Allow unit operation only with all parts in placeand operating safely.• Carefully inspect the unit on a regular basis andperform all maintenance as required.• Service and maintain the unit only with genuineAMMCO ® replacement parts.• Keep all instructions permanently with the unitand all decals/labels/notices on the unit clean andvisible.• Do not override safety features.• If ownership of the unit is transferred, providenew owner all information, manuals, and provideAMMCO ® new ownership information.WARNINGFailure to follow danger, warning, and cautioninstructions may lead to serious personalinjury or death to operator orbystander or damage to property. Do notoperate this machine until you read andunderstand all the dangers, warnings andcautions in this manual. For additionalcopies of either, or further information,contact:Hennessy Industries, Inc.1601 J.P. Hennessy DriveLaVergne, TN 37086-3565(615) 641-7533 or (800) 688-6359www.ammcoats.comSafetyDefinitions of Hazard LevelsIdentify the hazard levels used in this manual withthe following definitions and signal words:DANGERWatch for this symbol:It Means: Immediate hazards, which will result insevere personal injury or death.WARNINGWatch for this symbol:It Means: Hazards or unsafe practices, which couldresult in severe personal injury or death.CAUTIONWatch for this symbol:DANGERWARNINGCAUTIONIt Means: Hazards or unsafe practices, which mayresult in minor personal injury or product or propertydamage.Watch for this symbol! It means BE ALERT! Yoursafety, or the safety of others, is involved!AMMCO 800 On-The-Vehicle Brake Lathe • iii