ToneLab EX Owner's Manual - Vox
ToneLab EX Owner's Manual - Vox
ToneLab EX Owner's Manual - Vox
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6. VIBRATO<br />
This vibrato effect adds cyclical pitch changes, creating a<br />
wide range of vibrato from a mild warbling to cricket chirps<br />
to something fast and furious like an electric shock. With this<br />
effect you can, for example, assign the “DEPTH” parameter<br />
to the expression pedal and apply the effect at key points dur‐<br />
ing your performance.<br />
Knob/Switch Parameter<br />
EDIT DEPTH* Adjusts the modulation depth.<br />
TAP SPEED*<br />
Adjusts the modulation speed in a range of<br />
1.0–30 Hz.<br />
TAP+EDIT SPEED* Adjusts the speed.<br />
7. G4 ROTARY<br />
This models a rotary speaker.<br />
Knob/Switch Parameter<br />
EDIT DEPTH* Adjusts the modulation depth.<br />
TAP SPEED*<br />
Adjusts the modulation speed in a range of<br />
0.8–15 Hz.<br />
TAP+EDIT SPEED* Adjusts the speed.<br />
8. SLOW ATTACK<br />
This creates a violin‐like slow and gentle attack.<br />
Knob/Switch Parameter<br />
EDIT ATTACK* Adjusts the speed.<br />
9. PITCH<br />
This is a pitch shifter that allows you to play chords, and has<br />
a variable range of one octave upward or downward.<br />
Knob/Switch Parameter<br />
EDIT BALANCE*<br />
TAP PITCH*<br />
TAP+EDIT PITCH*<br />
Adjusts the balance between direct sound<br />
and effect sound.<br />
Specifies the amount by which the pitch of<br />
the effect sound will be shifted; an octave, a<br />
4th, or a 5th. Each time you press the<br />
switch, the setting will cycle between -12, -7,<br />
-5, DT (Detune), +5, +7, +12, -12.<br />
Specifies the amount by which the pitch of the<br />
effect sound will be shifted in semitone units<br />
(100 cents). The setting will change as follows:<br />
-12, -11– -1, 0, DT (Detune), +1– +12<br />
10.FILTRON<br />
This is an envelope‐controlled filter (wah) that opens or<br />
closes a filter according to the input from the guitar.<br />
Knob/Switch Parameter<br />
EDIT SENS*<br />
Adjusts the sensitivity to the guitar's volume. �<br />
If this parameter is assigned to the<br />
expression pedal, the cutoff frequency will<br />
be controlled by the expression pedal,<br />
meaning that the opening/closing of the filter<br />
will not be affected by the input from the<br />
guitar.<br />
TAP TYPE<br />
Specifies the direction of movement (up or<br />
down). �<br />
If Up is selected, the TAP switch LED will<br />
light-up.<br />
TAP+EDIT RESONANCE* Adjusts the amount of resonance.<br />
27