Sp-8 - Claymore Paintball

BODY KIT DISASSEMBLY1. Once you have removed the solenoid and the body from the SP-8 upper receiver, you are now leftwith the shell of the SP-8. The only time you will need to separate the two halves of the receiveris when you purchase a color body kit or need to replace a damaged part.2. To separate the two halves, first remove the upper receiver tactical rail by unscrewing the twoscrews and pulling straight upwards to remove. Also, you will need to remove the Round Activatorby pulling it in the same direction that the barrel points (Upper Reciever diagram).3. With the tactical rail and round activator removed, all that is left is to remove are the two upperreceiver screws. Once the two upper receiver screws have been removed, the two halves shouldcome apart. Make sure you pull the two halves apart gently. Do not force the partsUPPER RECEIVER DIAGRAM