MOUNTED UNIT - Bargam UK

More documents

Recommendations

Info

Mounted unitBooklet 4BSystem (900-1100-1300 Lt)M_020.tif233.011English- 12 -user manual
Mounted unitBooklet 4BPRODUCT MIXINGPreparation of chemical productImportantBefore starting the preparation of the chemical product,adopt all measures that are necessary to avoidcontamination danger and risks for men, animalsand environment.In particular:- Wear protection clothing to avoid the direct contactwith parts of the body, especially in the presenceof wounds.- Wear personal protective equipment to protectyour face, head and hands, use rubber gloves,dust masks, safety glasses and helmet.- Do not use protection devices that are not in perfectoperating conditions, in particular check thestate of the gas mask and cab filters.- Keep the chemical products out of the reach ofunauthorised persons (especially children and disabled).- Arrange all the equipment that is necessary tohandle the chemical product and the mix duringthe preparation, filling, draining and cleaning of thetank, as well as during the product distribution,adjustment, replacement or add of plant protectionproducts and maintenance operations.- Calculate the exact quantity of product to be mixedaccording to the surface to be treated and complywith the instructions supplied by the plant protectionproduct manufacturer. Do not mix differentproducts.- In case of accidental contact of the product or mixwith the skin, wash immediately with clean water.In case of illness refer to medical assistance,showing the product label.Caution - WarningDo not dispose of the product, the mix or other pollutingmaterial in the environment. Disposal must beperformed in accordance with the current regulationson waste.M_001.tifMixing without mixer1 - Insert water into the tank until 1/2 ÷ 2/3 of themaximum level is reached (see “Tank filling”).2 - Add the antifoaming additive (if required).3 - Enable the control unit (see booklet 6) and closeall boom sections to stir the water inside the tank.4 - Insert the chemical into the tank according to theinstructions.5 - Insert water into the tank until the maximum levelis reached (see “Tank filling”).233.0116 - Once the operation is completed disengage thecontrol unit.English- 13 -user manual
Page 1 and 2: Booklet 4BMOUNTED UNITuser manualSe
Page 3 and 4: Mounted unitBooklet 4BTECHNICAL SPE
Page 5 and 6: Mounted unitBooklet 4BLOADING AND U
Page 7 and 8: Mounted unitBooklet 4BWater system
Page 9 and 10: Mounted unitBooklet 4BTANK FILLINGT
Page 11: Mounted unitBooklet 4BWATER FILLING
Page 15 and 16: Mounted unitBooklet 4BStandard wate
Page 17 and 18: Mounted unitBooklet 4B6 - Open the
Page 19 and 20: Mounted unitBooklet 4BSPRAYINGImpor
Page 21 and 22: Mounted unitBooklet 4BWater system
Page 23 and 24: Mounted unitBooklet 4BWith system w
Page 25 and 26: Mounted unitBooklet 4B- Place a rec

MOUNTED UNIT - Bargam UK

Create successful ePaper yourself

Delete template?

Save as template?