Draka Industrial Cable GmbH - Prysmian Group

More documents

Recommendations

Info

MOUNTING INSTRUCTIONS MA 001E-2004Insert the uncoated fibres into a plug connector filled with epoxy glue, then put themin the heating box (Photos 15, 16, 17).Photo 15 Photo 16Photo 17 Photo 18Page 8/10Author: W. Moritz Draka Industrial Cable GmbH Issued: Nov. 2004
MOUNTING INSTRUCTIONS MA 001E-2004After 30 minutes of curing, crimp the Kevlar strain relief of the loose tube fibres to theconnectors (Photo 18).Now you can treat the contact surface.Score the protruding fibre with a diamond tool and break it off. Then start the firstmanual polishing on 12µm fine grained emery (Photo 19).Photo 19 Photo 20The second polish has to be made on the machine (Photo 20).This can be done alternatively by means of a suitable manual lapping tool.An optical examination with a hand microscope is absolutely necessary (Photo 21).Photo 21Page 9/10Author: W. Moritz Draka Industrial Cable GmbH Issued: Nov. 2004
Page 4 and 5: MOUNTING INSTRUCTIONS MA 001E-2004A
Page 6 and 7: MOUNTING INSTRUCTIONS MA 001E-2004S
Page 10 and 11: MOUNTING INSTRUCTIONS MA 001E-2004U

Draka Industrial Cable GmbH - Prysmian Group

Create successful ePaper yourself

Delete template?

Save as template?