Draka Industrial Cable GmbH - Prysmian Group
Draka Industrial Cable GmbH - Prysmian Group
Draka Industrial Cable GmbH - Prysmian Group
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MOUNTING INSTRUCTIONS MA 001E-2004After 30 minutes of curing, crimp the Kevlar strain relief of the loose tube fibres to theconnectors (Photo 18).Now you can treat the contact surface.Score the protruding fibre with a diamond tool and break it off. Then start the firstmanual polishing on 12µm fine grained emery (Photo 19).Photo 19 Photo 20The second polish has to be made on the machine (Photo 20).This can be done alternatively by means of a suitable manual lapping tool.An optical examination with a hand microscope is absolutely necessary (Photo 21).Photo 21Page 9/10Author: W. Moritz <strong>Draka</strong> <strong>Industrial</strong> <strong>Cable</strong> <strong>GmbH</strong> Issued: Nov. 2004
Change language