Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
RADA SENSE CONTROL PANELThe <strong>Rada</strong> Sense Control Panel must not be installed in areas where high frequencylighting is used. Certain types of compact fluorescent and low voltage lighting usehigh frequency lamps that can interfere with the infrared system used in the controlpanel. We recommend standard switch-start fluorescent lighting to be installedwithin these areas.Note! If the data cable is installed within a stud partition or recessed into a wall, makesure it is placed within a suitable conduit to allow easy removal during servicing.The Control Panel must only be installed onto a flat wall surface.Template12Caution!Make sure Silicone Sealant is applied in the groove onthe back of the Control Panel to stop water ingress intothe data cable access hole in the finished wall.3Caution!Do not trap the cable.Remove excess sealant.45679
Change language