Validation Checklists - Blackburn with Darwen Borough Council

N11 DESIGN AND ACCESS STATEMENT (INCLUDING USE OF SINGLE STATEMENTFOR COMBINED LISTED BUILDING AND PLANNING APPLICATIONS AND STATEMENTSOF SIGNIFICANCE)They are required for:• All applications for listed building consent.• All other planning applications with the following exceptions :• Engineering or mining operations• Development of an existing dwellinghouse or development within the curtilage of adwellinghouse for any purpose incidental to the enjoyment of the dwellinghouse,where no part of that dwellinghouse or curtilage is within a designated area• A material change in the use of land or buildings, unless it also involves operationaldevelopment• Extensions to the time limits for implementing existing planning permissions• Development of an existing flat for any purpose incidental to the enjoyment of the flatas such, where no part of that flat is within a designated area• The extension of an existing building used for non-domestic purposes where the floorspace created by the development does not exceed 100 square metres and whereno part of the building or the development is within a designated area• The erection, construction, improvement or alteration of a gate, fence, wall or othermeans of enclosure, up to 2m high or the height of the existing means of enclosure,whichever is the higher, where no part of the building or the development is within adesignated area or the curtilage of a listed building• Development on operational land consisting of the erection of a building or structureup to 100 cubic metres in volume and 15m in height and where no part of thedevelopment is within a designated area• The alteration of an existing building where the alteration does not increase the sizeof the building and where no part of the building or the development is within adesignated area• The erection, alteration or replacement of plant or machinery where, as a result of thedevelopment, the height of the plant or machinery would not exceed the greater of 15metres above ground level, or the height of the original plant or machinery, andwhere no part of the development is within a designated area; or• Development of land pursuant to section 73 (determination of applications to developland without conditions previously attached) of the Town and Country Planning Act1990.NB: A “designated area” means a World Heritage Site or a Conservation Area.11