Lighting - Zero88 Elara.pdf - SXS Events

Timed Crossfades between Scenes1. Set the A MASTER and B MASTERto zero.2. Set up a scene using the PRESET Afaders.3. Set up a different scene on thePRESET B faders.4. Set the CROSSFADE control to thetime required to fade scene A in.5. Quickly move the A MASTER to full.The scene on the PRESET A faderswill fade in and be output live. (Thetime taken for the fade to complete isdetermined by the value set on theCROSSFADE control). The redFADING light will flash while thedipless crossfade is taking place, andgo out when the crossfade iscomplete6. To crossfade to the scene onPRESET B, quickly move theA MASTER to zero and theB MASTER to full. The scene onPRESET B will fade in and the sceneon PRESET A will fade out in theselected time. The red FADING lightwill flash while ss crossfade is takingplace.7. A new scene can then be set up onPRESET A without affecting theoutputs.8. To crossfade to the scene onPRESET A, quickly move theA MASTER to full and the B MASTERto zero. The scene on PRESET A willfade in and the scene on PRESET Bwill fade out in the selected time. Thered FADING light will flash while thedipless crossfade is taking place, andgo out when the crossfade iscomplete.Preset Moden and courtesy Phone: Audio-Visual 0870 of 080 Services 2342email: www.sxsevents.co.ukenquiries@sxsevents.co.ukFlashing Channels1. Ensure that the FLASH FUNCTION isactive.2. Press and hold an individualCHANNEL FLASH button. (Thosebelow the PRESET A faders orPRESET B faders can be used). Thechannel is then added to the scene atthe level set on the GRANDMASTER.3. Release the CHANNEL FLASHbutton. The channel returns to itsprevious level.www.sxsevents.co.ukELARA 7371000 25.9.98 Page 13