Notice & Catalog SAIL-BSP-M&BP-IADC-FA-10160061 to be held ...

Steel Authority of India Limited MARKETING & BUSINESS PLANNING DEPTTBHILAI STEEL PLANTc. Weighment and invoicing shall be done on tonnage basis and as per practice in vogue inBSP.d. Operating authority – AGM I/c (Mech.), Foundry & Pattern Shop shall be operatingauthority.41.5 SAFETYa. Work at site shall be carried out in day time from 6 am to 6 pm and work permit shall beobtained on daily basis from site engineer.b. Work shall be carried out as per work and safety instructions of site engineer.41.6 PENALTYa. Penalty Clause – If the performance / progress is found unsatisfactory / unsafe for whatsoeverreasons, the contract is liable to be closed / terminated and the advance deposit of the partyshall be forfeited.b. Failure to observe safety rules will make the party liable to penalty by way of suspension /stoppage of work, fine or termination of contract.41.7 Duration of contracta. The duration of the contract is Four months from the date of issue of sale offer by BSP.However, the contract can be extended by up to three months at the discretion of the BSPmanagement at the same rates and conditions if required.42.0. For Railway Sleepers (Lot No.47899)• Material Quantity is approximately 300 T and may vary + 10%.43.0. For Lot No.47913(Circular Decanter # 9) and Lot no.47914(BATTERY PROPER INCLREFRACTORIES AND ALL) the quantity tolerance is + 10%.NOTE : In case the general terms & conditions contradicts with special conditions in a particularclause the special condition will prevail upon the general condition.