Domestic-user-manual - Heat pump water Heater

RSection 2InstallationThe following general information describes how to install the domestic Heat pumpwater heater.Note: Before installing this product, read and follow all warning notices andinstructions. Only a qualified service person should install the heat pump.Materials needed for InstallationThe following items are needed and are to be supplied by the installer for all heat pumpinstallations:1. Plumbing fittings.2. Level surface for proper drainage.3. Ensure that a suitable electrical supply line is provided. See the rating plate on the heatpump for electrical specifications. Please take a note of the specified current rating. Nojunction box is needed at the heat pump; Connections are made inside of the heat pumpelectrical compartment. Conduit may be attached directly to the heat pump jacket.4. It is advised to use PVC conduit for the electrical supply line.5. Use a booster pump for pumping water in case of low water pressure.6. A filter on the water inlet of tank is needed.7. The plumbing should be insulated to reduce its heat loss.Note: We recommend installing shut-off valves on the inlet and outlet water connections forease of serviceability.3