Domestic-user-manual - Heat pump water Heater

RInstallation detailsAll criteria given in the following sections reflect minimum clearances. However, eachinstallation must also be evaluated, taking into account the prevailing local conditions suchas proximity and height of walls, and proximity to public access areas. The heat pump mustbe placed to provide clearances on all sides for maintenance and inspection.1. The installation area must have good ventilation and the air inlet/outlet must not behindered.2. The installation area must have good drainage and be built on a solid foundation.3. Do not install the unit in areas accumulated with pollutions like aggressive gas (chlorineor acidic), dust, sand and leaves etc.4. For easier and better maintenance and troubleshooting, no obstacles around the unitshould be closer than 1000mm.(See Figure 1)Air InletOver 1mHeat PumpOver1mOver 1mAir OutletOver 1mFigure 16