Alibre Design

Chapter 9 - Working with PartsThe Measurement Tool dialog box appears.2. Select a measurement Type, either Linear or Angular.3. Select a Mode:Pairs: measurement is taken between two entities, e.g. distance from edgeto edgeChain: cumulative measurement is taken between sequential selections, e.g.distance along multiple edgesFrom First: measurement is taken between two entities, with first selectionalways remaining constant4. Select an entity to measure or an entity to measure from.Note: You can also pre-select entities and then open the Measurement Tool dialogbox. When pre-selecting, you must hold the Shift key down to select multipleitems.5. If applicable, select an entity to measure to.231