Alibre Design

Chapter 12 - Drawings1. Select the Standard Views tool from the Detailing toolbar; or from theInsert menu, select Standard Views. The Standard Views Creation dialog boxappears.2. Follow steps 1-4 in section 11.1.5 for creating standard views. Then check theProject as Flat Pattern box as shown below:3. Click OK. A preview of the flat pattern view appears in the work area.4. Move the cursor to position the view.5. Click once to place the view on the sheet.12.6 Custom TemplatesYou can create a custom drawing template that meets your design processrequirements. A custom template can be created in two different ways: as a symbolthat you insert into a drawing, or saved as a drawing that you select from the NewSheet Properties dialog.12.6.1 Creating a Custom Template‣ To create a custom template:1. Open a new drawing workspace. The New Sheet Properties dialog box appears.2. Select Blank Sheet.3. Select a sheet size from the pull-down list.4. Click the Create An Empty Drawing check box.5. Click OK. An empty drawing workspace appears.383