Alibre Design

Chapter 12 - Drawings2. Select a linear edge or straight sketch line on an existing view. The edge selectedfrom the parent view must reside on a face that is perpendicular to the plane of thescreen.3. Note: To use a sketch line as the projection line, the sketch line must reside onthe view. To do this, first select the view you wish to use to create the auxiliaryview. Then select the Activate 2D Sketch tool from the sketching toolbar andsketch a line. The line can intersect the view boundaries. Exit Sketch Mode, thenfollow steps 1 and 2 above to create the new view. (After the auxiliary view iscreated, the sketch line can be deleted.)4. A preview of the auxiliary view is displayed.5. Move the cursor to position the auxiliary view to the correct location.6. Click to place the auxiliary view. The auxiliary view is placed on the sheet, alignedto the edge from which it was created. You can only move the auxiliary view in thedirection normal to the edge from which it was created.369