User Guide

Vehicle Installation4 Power on your Stratus 6 by pressing the Powerbutton.5 Be sure the vehicle is outside and the antenna has aclear view of the sky. Verify that you are receivingthe SIRIUS signal. There should at least be one baron the upper right corner of the main display screenthat denotes antenna signal strength. You can alsopress and hold menu and then pressPress the Select button. TheSatellite and Terrestrial bars showthe strength of the signal beingreceived. If the signal reception isgood, press and hold menu to returnto the main display screen.to scroll to and highlight Signal.6 Ensure that the Stratus 6 is tuned to channel 184. Upon power up,the Stratus 6 should tune to channel 184 by default, when it’s not yetactivated. If it’s not on channel 184, refer to “Listening to SatelliteRadio” on page 62 to learn about how to tune a channel.7 Turn on your vehicle’s stereo system. Set it to play input from theauxiliary input source.8 You should hear SIRIUS channel 184 through your vehicle’s stereosystem. You are now ready to activate your Stratus 6.9 The audio level output of the Stratus 6 can be increased or decreasedas necessary to match the audio levels of other sources in your vehicle.Refer to “Audio Level” on page 84.jumpS i g n a lSAT - +TER - +42