20.07.2015 Views

44A ZC - Travis Industries Dealer Services Login Page

44A ZC - Travis Industries Dealer Services Login Page

44A ZC - Travis Industries Dealer Services Login Page

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

CARE AND MAINTENANCEMaintenance ScheduleThe following schedule should be followed to insure your appliance stays in peak condition.Weekly Maintenance: The following should be done once a week:ASH DISPOSALCLEANING OF GOLD PLATED SURFACESGLASS CLEANINGBi-Monthly Maintenance: The following should be done every two monthsduring the heating season:DOOR AND WINDOW GASKET INSPECTIONLUBRICATEDOOR LATCH INSPECTION AND ADJUSTMENTCHECK FOR CREOSOTEYearly Maintenance: The following should be done after each heating season:CATALYTIC COMBUSTOR INSPECTION & CLEANINGFIREBOX INSPECTION AND CLEANINGAPPLIANCE TOUCH-UPBLOWER CLEANINGCHIMNEY SYSTEM CLEANINGMaintenance InstructionsASH DISPOSALDuring constant periods of use ashes must be periodically removed from the appliance toprevent a build-up which will affect the performance and limit the fuel load capacity. Ashesshould be placed in a metal container with a tight fitting lid. The closed container of ashesshould be stored on a non-combustible floor or on the ground, well away from anycombustible material, pending final disposal. If the ashes are to be disposed of by burial insoil or otherwise locally dispersed, they should be retained in the closed container until allcinders have thoroughly cooled. Other waste must not be placed in this container.CLEANING OF GOLD PLATED SURFACESGold is the very best material available for plating fireplace fronts, but it isnot indestructible. The most common complaint with any plated surface ona wood burning appliance is discoloration. This can only be caused byheat and chemicals. The discoloration is permanent and cannot beremoved without removing the gold plating. The following suggestions willhelp you keep the shine in your gold plating.Keep plating free of dust and finger prints with DENATURED ALCOHOLapplied with a very soft cloth. Do not use any other cleaners or polishes.Do not start a fire if there are finger prints or smudges on the gold plating, asthey could become permanently etched in the gold plating. Make sure thatthe brick or stone is free of acid before installing the gold plating, consultyour mason.DenaturedA l c o h o l<strong>Page</strong> 17

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!