44A ZC - Travis Industries Dealer Services Login Page

CARE AND MAINTENANCE (Continued)CHIMNEY SYSTEMCLEANINGWe recommend you have yourchimney system and appliancechecked and cleaned by acompetent chimney sweep at leastonce a year.Check the chimneytermination for any blockage(ash, leaves, etc.)The chimney should be fully sealedand securely attached.The chimney termination should befree of all blockage (ash, leaves,etc.)Check to make sure the chimney isfully sealed and is secure.Blower CleaningEvery year the blower should be cleaned of any dirt or dust that may have accumulated. Theblower housing on your Fireplace Xtrordinair is a separate unit located away from thefireplace. Locate the intake grill that fits over the blower housing and remove the four screwsthat hold the grill in place with a 1/4" nutdriver. Remove both the filter and filter screen.Vacuum out any dirt or dust that may have accumulated inside the blower housing. Shakethe filter and filter holder to remove any dirt or dust that may have accumulated. Replace thefilter screen, filter (blue side facing the intake grill), and intake grill and re-attach with the fourscrews removed. See the illustration below.Blower Housing Filter Screen FilterIntake GrillAfter removing the intakegrill, insert the filter screeninto the blower housing.Page 22Place the filter intothe filter screenwith the blue sidefacing outwards.Remove the fourscrews that go intothese holes with a 1/4"nutdriver. Thenre-install the grill afterplacing the filter screend filt i l