20.07.2015 Views

44A ZC - Travis Industries Dealer Services Login Page

44A ZC - Travis Industries Dealer Services Login Page

44A ZC - Travis Industries Dealer Services Login Page

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

REPLACEMENT PARTS AND REMOVAL INSTRUCTIONS(Continued)Removing and Replacing the Catalytic CombustorBefore replacing the catalytic combustor, make sure it is inoperable by conducting the stepsfor testing the catalytic combustor in the section "CARE & MAINTENANCE". The catalyticcombustor is fragile, and should not be removed unless being replaced. Before attempting toremove the catalytic combustor, allow the fireplace to sit for approximately 24 hours without afire.1. Using a 9/16"wrench or socketwrench, remove the 7bolts holding the steelplate in place on the topinside of the firebox.This is the holder of thecatalytic combustor.2. Pull the combustorup slowly and carefullyfrom the holder. Thegasket around thecombustor will comeapart and need to bereplaced. This can beobtained from yourFireplace Xtrordinairdealer.3. To reinstall thecombustor, clean theholder, wrap thecombustor with newInterram gasket andcarefully slide it into theholder. Put the holderback in place andtighten the bolts.Fireplace Xtrordinairsuggest that a hightemperature anti-seizelubricant be applied tothe bolts before they areput in to preventseizing.Roof of Firebox(This Componentis not removed)Interram GasketCatalytic CombustorInterram GasketCeramic GasketMixing ScreenCombustor Holder

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!