Programming Info D2XXPG31.pdf

Appendix102char *SerialNumber;// "FT000001" if fixed, or NULLWORD MaxPower; // 0 < MaxPower USB2)//// FT2232C extensions//UCHAR Rev5;// non-zero if Rev5 chip, zero otherwiseUCHAR IsoInA;// non-zero if in endpoint is isochronousUCHAR IsoInB;// non-zero if in endpoint is isochronousUCHAR IsoOutA;// non-zero if out endpoint is isochronousUCHAR IsoOutB;// non-zero if out endpoint is isochronousUCHAR PullDownEnable5;// non-zero if pull down enabledUCHAR SerNumEnable5;// non-zero if serial number to be usedUCHAR USBVersionEnable5; // non-zero if chip uses USBVersionWORD USBVersion5;// BCD (0x0200 => USB2)UCHAR AIsHighCurrent;// non-zero if interface is high currentUCHAR BIsHighCurrent;// non-zero if interface is high currentUCHAR IFAIsFifo;// non-zero if interface is 245 FIFOUCHAR IFAIsFifoTar;// non-zero if interface is 245 FIFO CPU targetUCHAR IFAIsFastSer;// non-zero if interface is Fast serialUCHAR AIsVCP;// non-zero if interface is to use VCP driversUCHAR IFBIsFifo;// non-zero if interface is 245 FIFOUCHAR IFBIsFifoTar;// non-zero if interface is 245 FIFO CPU targetUCHAR IFBIsFastSer;// non-zero if interface is Fast serialUCHAR BIsVCP;// non-zero if interface is to use VCP drivers} FT_PROGRAM_DATA, *PFT_PROGRAM_DATA;FT_PROGRAM_DATA (EEPROM Programming Interface - compatible with DLL version3.1.6.1 or later)typedef struct ft_program_data {DWORD Signature1;DWORD Signature2;DWORD Version;// Header - must be 0x00000000// Header - must be 0xffffffff// Header - FT_PROGRAM_DATA version// 0 = original// 1 = FT2232C extensions// 2 = FT232R extensionsWORD VendorId;// 0x0403WORD ProductId;// 0x6001char *Manufacturer;// "FTDI"char *ManufacturerId;// "FT"char *Description;// "USB HS Serial Converter"char *SerialNumber;// "FT000001" if fixed, or NULLWORD MaxPower; // 0 < MaxPower