Hotstart Catalog - Davidson Sales Co.

In-BlockDirect Immersion HeatersNote: In-block heaters are complete with 2-wire w/ground 6 footHPN cord and plug. For cord replacements or “Y” thermocordenergy saver, please reference page 56.CUSEngine ModelPart Number120 VoltsPart Number240 Volts Watts Application InformationHeat ShieldRequiredOil HeaterThread Size*Product ImageCaterpillar — Continued3024 2.22L FP531-003 FP532-003 530Replaces 40mm core plug on the front,left side of the engine3034 2.95L FP531-001 FP532-001 530Replaces 50mm core plug located atback of head3044 3.3L PF531-001 PF532-001 530Mounts in oval shaped opening on theright of the engine3046 5.0L PF531-000 PF532-000 530Replaces 35mm core plug located at rearof engine, left side3054 3.99L3054B 4.23LPER-751FPPER-101FPPER-752FPPER-102FP7501000Mounts in the 1-1/4” freeze plug openingon the left side of the engine3054C PER-751FP PER-752FP 750Mounts in 1-1/4” freeze plug at left rearof engine3056 6.0L PER-151FP PER-152FP 1500Mounts in the 1-1/2” freeze plug on theright side of the engine31143116FP101-001FP151-001FP102-001FP152-00110001500Replaces the core plug on the right sideof the engine just below theturbochargerYES11/16”X123176 10.3Lthrough 1995DD8L-101CAT-12015TF151-001DD8L-102CAT-12023TF152-001100012501500Replaces the 3/4” plug on the right sideofthe engine just below the head.1” NPT3176 10.3L1996 and laterTF121-000 TF122-000 1250Replaces the 1” threaded plug in the oilcooler bonnetYES11/16”X123196 12.0L TF121-000 TF122-000 1250Replaces 1” threaded plug in oil coolerbonnetYES11/16”X123204all 1100 seriesCATX-751CATX-101CATX-752CATX-1027501000Replaces the core plug on the right sideof the engine just below theturbocharger22mm3208 — 2 heaterswith a single cord CATX-2-751-Y CATX-2-752-Y 1500total3208RecommendedAftermarketInstallation33043306JD3/4-101INJD1-101INJD3/4-151INJD1-151INDD8L-101CAT-12015TF151-001JD3/4-102INJD1-102INJD3/4-152INJD1-152INDD8L-102CAT-12023TF152-0011000100015001500100012501500Use on industrial engines when clearaccess is available.Replaces any core plug - one on eachside of the engineReplaces any of the 3/4” or 1” plugs onthe water transfer casting (right front ofthe engine). 3/4” use JD3/4 — 1” useJD1Replaces the 3/4” plug on the left side ofthe engine3406C/E 14.6LAC-101CATV-151AC-102CATV-15210001500Replaces 1” thread-in plug in the rear ofthe oil cooler bonnet on the right side ofthe engine1” NPT* If supplemental oil heating is desired, this column gives the correct thread size in oil pan. See NOTE on page 54.Customer Support: (509) 536-8660www.hotstart.com45