Hotstart Catalog - Davidson Sales Co.

In-BlockDirect Immersion HeatersNote: In-block heaters are complete with 2-wire w/ground 6 footHPN cord and plug. For cord replacements or “Y” thermocordenergy saver, please reference page 56.CUSEngine ModelPart Number120 VoltsPart Number240 Volts Watts Application InformationHeat ShieldRequiredOil HeaterThread Size*Product ImageDeutz – continued1012 — 4 & 6 cyl1013 — 4 cylPF751-000 PF752-000 750Mounts in the oval shaped plate openingon the oil cooler casting1013 6 cyl PF121-001 PF122-001 1250Mounts in the oval shaped plate openingon the oil cooler casting10156 & 8 cylTL151-004 TL152-004 1500Mounts in 30MM plug in water elbow onfront of the engine2012 — 4 & 6 cyl PF751-002 PF752-002 750Mounts in the oval shaped plate openingon the oil cooler casting6.9L & 7.3L V-8diesels through1993FC101-PY1 None 1000FordMounts in a freeze plug on the engine'sblock. No replacement cord available.7.3L V-8 dieselsfrom 1994 onTF751-002DD8L-101TF752-002DD8L-1027501000Mounts in the 3/4” NPT plug in theengine's blockHino3.8L, 5.8L, 6.0L,6.4L, 6.7L, W04C-T,W06E, H06C-T,H07C-BDD8L-101 DD8L-102 1000Threads into 3/4” NPT openingin the blockYES6HE14BD16BD1 TF401-501 NONE 4006SA16BG1IsuzuReplaces 1” NPT plug in left rear ofengineIvecoNEF 4cylNEF 6 cylPF751-001 PF752-001 750Mount in either front or rear opening onright side of engine blockJohn DeereWith 3/4” plug inthe back of theblockJD3/4-101INJD3/4-151INJD3/4-102INJD3/4-152IN100015003/4” NPT opening in the rear faceof the blockcheckExhaustroutingWith 1” plug in theback of the blockJD1-101INJD1-151INJD1-102INJD1-152IN100015001” NPT opening in the rear faceof the blockWith 1 5/8”opening on the sideof the water jacketJDS-101 JDS-102 10001-5/8” threaded opening on the side ofthe block in the water distributionchannel* If supplemental oil heating is desired, this column gives the correct thread size in oil pan. See NOTE on page 54.Customer Support: (509) 536-8660www.hotstart.com49