Hotstart Catalog - Davidson Sales Co.

In-BlockDirect Immersion HeatersNote: In-block heaters are complete with 2-wire w/ground 6 footHPN cord and plug. For cord replacements or “Y” thermocordenergy saver, please reference page 56.CUSEngine ModelPart Number120 VoltsPart Number240 Volts Watts Application InformationDetroit Diesel – continuedHeat ShieldRequiredOil HeaterThread Size*Product ImageSERIES 40all versionsPER-751FPINTA-121FR151-001PER-752FPINTA-122FR152-00175012501500Mounts in the frost plug opening on theleft side of the engineSERIES 50SERIES 60AC-101CATV-151AC-102CATV-15210001500Mounts in the 1” NPT opening in eitherwater pick up pipe (up to 1991) or in the1” NPT opening on the oil coolerhousing after 1991yes on 1991and later3/4” NPTSERIES 55 PF151-000 PF152-000 1500Mounts in the triangle plate on the sideof the block3-53, 4-53, 3-71,4-71 with watercooled aircompressor3-53, 4-53, 3-71,4-71 without watercooled aircompressorDD-751-S DD-752-S 750DD-751 DD-752 750Mounts in the oval shaped plate onthe block. Check clearance.Mounts in the oval shaped plate on theblock. Check clearance.6-71with water cooledair compressorDD-151-S DD-152-S 1500Mounts in the oval shaped plate on theblock. Check clearance.6-71without watercooled aircompressorDD-151 DD-152 1500Mounts in the oval shaped plate on theblock. Check clearance.8.2 L V-8 Diesel DD8L-101 DD8L-102 1000Threads into the 3/4” NPT openingon the block6V-53with water cooledair compressor6V-53without watercooled aircompressorDD6V-751-S DD6V-752-S 750DD6V-751 DD6V-752 750Mounts in the oval shaped plate on theblock. Check clearance.Mounts in the oval shaped plate on theblock. Check clearance.6V71 & 8V71Alternate locationAC-101CATV-151AC-102CATV-15210001500Threads into 1” NPT plug in the frontface of the block6V-71 & 8V-716V-92 & 8V-92except GMCGeneral modelsDDV-151B DDV-152B 1500 Mounts in the square plate on the block6V92 & 8V92alternate location -threads into oilcooler.DD8L-101 DD8L-102 1000Threads into the 3/4” NPT opening inthe oil cooler housing.Note - not allengines have this openingDeutzBF4L913 BF6L913F3L912 F3L913F6L9131011 SERIESoil cooled enginesOLT221515plusA22M48M(adapter)n/a 150Use adapter kit to mount the 22MMheater in the 48MM opening22MMor48MM* If supplemental oil heating is desired, this column gives the correct thread size in oil pan. See NOTE on page 54.48 Customer Support: (509) 536-8660 www.hotstart.com