Omron NT600S Manual - Northern Industrial

Functions of the Allocated Bits and Words Section 1-5S Touch switchesAllocation destination: BitTouch switch #12Bit 009012NT600SPCBit 009012: ONThe lamp comes on (flashes) when the PC’s control bit is ON (1) and goes offwhen it is OFF (0). While the touch switch is pressed, the PC’s notification bitturns ON (1), and when it is released, the bit turns OFF (0).S Numeral memory tableAllocation destination: WordNumeral memorytable 1 (TIM003)NT600SPCNumeral memory table 150 (0005CH)Allocate numeral memory tables to arbitrary words in the PC. If word contentschange when corresponding numeral memory table is displayed on the screen,the value on the screen will also change. Monitoring of words can also be madeeasily.Reading and writing are executed so that the contents of allocated words arealways the same as those of the numeral memory tables.S Character-string memory tableAllocation destination: WordNT600SPC(“a”, “b”)(“c”, “d”)(“e”, “f”)Character-string memory table 1Allocated word number: 3chFirst word: DM0100Allocate character-string memory tables to arbitrary words in the PC. If wordcontents change when corresponding character-string memory table is displayedon the screen, the value on the screen will also change. Messages can bedisplayed easily.Reading and writing are executed so that the contents of allocated words arealways the same as those of the character-string memory tables.17ηττπ://νιχοντρολσ.χοm