LSB

LSB NON STOP BALINGHigh Performance and Low Maintenance9PlungerEvery KUHN plunger and bale chamber is engineered to producerock-hard, ultra-dense bales. KUHN LSB balers have a 3m (10’) balechamber, with hydraulic cilinders mounted at the rear of the bale chamberto completely enclose the bale. This design applies maximum leverageon the bale during formation, and prevents unwanted expansion andloss of density before the bale is finished. The plunger is rocketed at 46strokes/minute via the main gearbox. This high-speed plunger requiresprecise, heavy-duty guidance, which is provided by hardened rails andenormous 125mm/5” diameter) support rollers. The roller bearings aremounted outside the bale chamber and are easily accessible for inspectionand maintenance. LSB 890 and 1290 models offer an adjustable balechamber that gives the customer the option to produce two different balesizes with the same baler.GreasingThe standard and easy-to-reach central greasing points on top of thebaler provide lubrication for the knotters and plunger. Equipping thebaler with an automatic greasing system reduces daily maintenance.Basic setting and monitoring of this system are doneusing the ISOBUS control.Hydraulic systemAll KUHN LSB balers have their own, on-board hydraulic system,independent from the tractor’s hydraulics. The hydraulic pressure onthe 3m (10’) bale chamber is controlled and monitored through theISOBUS terminal. In case of an overload, the ISOBUS software willregulate the pressure automatically to prevent damage to the baler.