LSB

SPECIFICATIONS LSB 870* / OC LSB 890 / OC LSB 1270* / OC LSB 1290 / OCBale dimensions 2x3 3x3 2x4 3x4Width (cm/inches) 80 / 32 80 / 32 120 / 47 120 / 47Height (cm/inches) 70 / 28 80 or 90 / 32 or 35 70 / 28 80 or 90 / 32 or 35Length (cm/inches) 60 / 24 up to 300 / 118PickupIntake width (cm/inches) 210 / 83 230 / 91Pickup diameter (cm/inches) 34 / 13Number of tine bars 4 5Tine spacing (mm/inches) 61 / 2.4Bale chamberNumber of plunger strokes46 / minPlunger stroke (cm/inches) 69.5 / 27Density control 3 Hydraulic Cylinders 4 Hydraulic CylindersBale chamber length (m/ft.) 3 / 10ControlISOBUS (Focus / CCI)Knotting systemNumber of knotters 4 6Twine capacity (rolls) 24TWIN-STEP® Knotting Optional Standard Optional StandardIntake systemIntegral Rotor type OptiFeed / OptiCut OptiFeed / OmniCutKnives - / 10 - / 23Cutting length (mm/inches) - / 70 / 2¾ - / 45 /1¾Knife protection - / Single Spring - / Single HydraulicWheels and AxlesSingle axle 600 / 50-22.5 ***Single axle (opt) 710 / 40 - 22.5Tandem axle steered 16.0 / 70-20Tandem axle steered (opt) 500 / 55-20Tandem axle steered (opt) 560 / 45-22.5Brakes systemAir / HydraulicDimensionsLength (m/ft.) 7.8 / 25’ 7” 8.0 / 26’ 3”Width (m/ft.) 2.76 / 9’ 1” 3.0 / 9’ 10”Height (m/ft.) 2.7 / 8’ 10” 2.75 / 9’Weight (kg/lbs)** 7500 / 16,535 7700 / 16,975 8800 / 19,400 9210 / 20,370Minimum tractor requirement 75kW (100hp) 87kW (115hp) 98kW (130hp) 109kW (145hp)Horsepower requirement may vary with different crops, conditions, and options used. Consult operators manual for proper tractor sizing.** Single axle model excluding cutting device *** Not available on LSB 1290 OC*(This model is not currently available in North America)Our material is produced in accordance with the European Machinery Directive in the member states of the European Union. In countries outside the E.U., our machinery complies with the safety regulations set bythe country concerned. Some safety devices may have been removed from our leaflets in order to clarify the illustration. Under no circumstances should the machine be operated without the necessary safety devicesin place (as specified by the assembly instructions and operators manual). We reserve the right to change any designs, specifications or materials listed without further notice. Our models and trademarks are patentedin more than one country. Machines and equipment in this leaflet can be covered by at least one patent and/or registered design. Registered trademark(s).YOUR KUHN DEALER:KUHN - GELDROP B.V. - The Netherlandswww.kuhn.comKUHN NORTH AMERICA, INC.Corporate Headquarters1501 West Seventh Avenue - P.O. Box 167Brodhead, WI 53520-0167 USATel: (608) 897-2131 Fax: (608) 897-2561www.kuhnnorthamerica.comKUHN FARM MACHINERY PTY. LTD7 Manorwood PI.MITCHAM, 3132 VIC,Fax: 039874 3462www.kuhn.comUnited KingdomKUHN FARM MACHINERY (U.K.) LTDStafford Park 7,TELFORD - SHROPSHIRE TF 3 3 BQPhone : TELFORD (01952) 239300/1/2Fax : (01952) 290091www.kuhn.co.ukTo protect the environment, this leaflet is printed on chlorine-free paper / Printed the Netherlands - ZPAHO1GB B 09-10 - Copyright KUHN 2010