LSB

LSB INTAKEPower Density7The Power Densitysystem ensuresconsistently-filledflakes and rock-hardbales by constantly adapting toever-changing windrow conditions.Whether baling a small, first-cuttingalfalfa crop or a large, bulky strawcrop, and whether baling anuneven windrow produced by acombine harvester or a uniformwindrow produced by a rotarymower, the results are the same,consistency in every flake, forrock-hard, box-shaped bales.These consistent results mean lowercosts for bale handling, twine andfuel, plus a more attractive bale tofeed or sell.With the Power Density system,crop is directly removed from theIntegral Rotor by the single-feederfork (red). This single-feeder forkworks at twice the speed of theplunger, continuously clearing theentrance of the pre-chamber andpre-compressing the crop into aflake. As the pre-chamber is filledto 100%, pressure is exerted onthe wedges (white) at the top ofthe pre-chamber. At a set point,the pressure on the wedges isovercome, triggering the singlefeederfork to take an extendedstroke, sweeping the precompressedflake up into the balechamber where the plungercompresses the crop to form adense bale.