Automated Construction - Test Input

More documents

Recommendations

Info

http://data.worldbank.org/about/countryclassifications 6.- Tatyana P. Soubbotina, (2004) “Beyond Economic Growth”, The international Bank for Reconstruction and Development/ The Worlds Bank, Washington D.C. 7.- The Economist Intelligence Unit (Aug 2012). "A Summary of the Liveability Ranking and Overview". The Economist. [Accessed 28 July 2012]available at: https://www.eiu.com/public/topical_report.aspx?ca mpaignid=Liveability2012 8.- Figure 3, “Jakarta’s traffic jam, Who is wrong?”, 2010, [Accessed 18 August 2012] available at http://explore-id.blogspot.de/2010/08/jakartatraffic-jam-whos-wrong.html 9.- World Set Apart, Teresa Cadeira, december 2008, [Accessed 28 July 2012].available at: http://urbanage.net/10_cities/08_saoPaulo/_essays/SA_Calde ira.html 10.-Figure 4“la ciudadania express”, [Accessed 28 July 2012].available at: http://ciudadaniaexpress.com/2009/07/25/la-politica-habitacionalprivada-y-publica-ajena-a-las-necesidades-de-lapoblacion/ 11.- Modul P 03 ARC, Integrated Automated Building Construction Sites, Automatic Construction System Based on Robotic Cranes for Frameworks of High-rise Buildings- Korea -. 12.- Population Pyramids of the World: 1950-2050, [Accessed 18 august 2012] available at http://populationpyramid.net/ 13.- “Newly Industrialized Countries” [Accessed 18 March 2012], Wikipedia, available at: http://en.wikipedia.org/wiki/Newly_industrialized_co untry 14.-Shinji Harper (2009) “La ciudania express”, UNAM [Accessed 18 august 2012].available at: http://ciudadaniaexpress.com/2009/07/25/lapolitica-habitacional-privada-y-publica-ajena-a-lasnecesidades-de-la-poblacion/ 15.-Daniele Archibugi, Jonathan Michie , 1997, Technology, “Globalization and Economic Performance”, Cambridge University Press. 16. The worlds Bank, “What are Middle-Income Countries?”, Accessed 18 august 2012] available at: http://web.worldbank.org/WBSITE/EXTERNAL/EX TOED/EXTMIDINCCOUN/0,,contentMDK:214533 01~menuPK:5006209~pagePK:64829573~piPK:6 4829550~theSitePK:4434098,00.html 22
A “DIY” Home Personal Production System Mona D. Biljeek * Department of Architecture, Building Realization and Robotics Lab, Technical University Munich, Germany *Corresponding author (mbiljeek@nyit.edu) Purpose Rapid Prototyping, also known as ‘Additive Manufacturing’, ‘Three Dimensional Printing’, ‘Solid Freeform Fabrication’ and ‘Layered Manufacturing’, are terms referring to a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. 1 Working similarly to a regular computer printer, with its Input/Output system but in a 3D manner, the technology, although a revolutionary invention, has not yet prominently spread out commercially, nor made its way to personal domestic use in spite of its techniques being available since the late 1980s 2 in the areas of models production and prototype designs. Although the technology has not seen a rapid progression as other modern computerized technologies normally do nowadays in relatively short periods of time, it is easy to foresee the revolutionary changes and innovations it could bring about if it did become realistically feasible for personal use at one’s own home. Method In oppose to previous and current developments in this field, which have concentrated on commercial Rapid Prototyping, in this paper, an abstract concept of a potential Home Rapid Prototyping System design is introduced, going towards Personal Fabricators* and Home Manufacturing, with a modular approach to both its design and its functionality, while also emphasizing on the prospective value of its output and productivity. Results & Discussion The aspects intended to be heightened in this paper with this particular conceptual design include the factors that define an individual’s productivity at home and subsequently estimating their output’s contribution to society, considering the value of home manufactured products if they were to become better alternatives to market goods. In addition, the approach is intended to propose future solutions for Rapid Prototyping system designs in order to bring the technology into practical feasibility and availability. *Universal fabrication machines, which materialize three-dimensional things from digital data. 3 Keywords: Rapid Prototyping, Personal Production System, Domestic Fabrication INTRODUCTION Although a relatively new term, Rapid Prototyping is a sort of 3D printing technology that has existed for decades, however, it has not yet prominently established itself in the market. Current developers and firms using this technology provide “services” rather than the product itself. This paper represents a conceptual design of an at-home Rapid Prototyping system for personal use, highlighting the substantial interface between the system and the average user, identifying its potential advantages, while focusing on convenient ways of making it applicable for domestic use. Fig.1. Rapid Prototyping 23 CONCEPTUAL DESIGN OF A HOME RAPID PROTOTYP- ING SYSTEM A comprehensive system consisting of three separate main cubical units: Design Unit, Manufacture Unit and Recycle unit, in sequence according to their use in the production process. A modular design is applied to the concept. The first stage of production starts with the Design Unit which allows the user to enter their thoughts and ideas directly into a computer through hand sketching, computer drawings and plans which are later processed by the computer into 3D CAD figures and data sent to the fabrication stage to produce the physical 3D objects. The second stage is where the fabrication procedure occurs, in the Manufacture Unit. The user is able to own as many as these Manufacture Units according to their needs of products to be made and their products’ range of materials. Every single Manufacture Unit produces products of a specific type of material, ex. Plastic Manufacture Unit, Metal Manufacture Unit, Wood Manufacture Unit, Glass Manufacture Unit, Textile Manufacture Unit, Rubber Manufacture Unit, …etc.
Page 1 and 2: Advanced Construction and Building
Page 3 and 4: Foreword CIB Working Commission, W1
Page 5 and 6: CIBW119CIC 2012 Keyword Index Keywo
Page 7 and 8: CIBW119CIC 2012 Table of Contents T
Page 9 and 10: Mass customization limitation and g
Page 11 and 12: 3D production : In this kind of bui
Page 13 and 14: References 1,2. Tim Crayton, "The D
Page 15 and 16: RESEARCH GOAL Construction of build
Page 17 and 18: Fig.7. Totora Reed Boat 16 Cherrapu
Page 19 and 20: concept of a huge plane would have
Page 21 and 22: Fig.22. Cross-sectional view Area D
Page 23 and 24: Fig.29. Robot arm fixing the panels
Page 25 and 26: Feasibility of new technologies in
Page 27 and 28: Fig. 3 Jakarta’s traffic and publ
Page 29: Without proper response in policies
Page 33 and 34: Fig.6. The units’ foldable legs A
Page 35 and 36: Mass Customization in Home Industry
Page 37 and 38: to brand of metal plates and webs u
Page 39 and 40: Registeration New client form Clien
Page 41 and 42: Integrated Work Space Systems for E
Page 43 and 44: terms of physiological alterations,
Page 45 and 46: CONCLUSIONS Analyzing all the data
Page 47 and 48: has been given to R&D and the lates
Page 49 and 50: and positioning, and the climbing m
Page 51 and 52: � Make the system as non-intrusiv
Page 53 and 54: lifted one story up, the constructi
Page 55 and 56: their home country, which is perfec
Page 57 and 58: PROJECT FREQUENCY REQUIREMENT If on
Page 59 and 60: Demographic Change Design: Integrat
Page 61 and 62: need health plans like Medicare and
Page 63 and 64: and other elements are stacked at c
Page 65 and 66: Prefabrication and Automation in Ra
Page 67 and 68: when it starts to decay. Soil needs
Page 69 and 70: production flow, the company adopte
Page 71 and 72: RESEARCH AND SURVEY In developing c
Page 73 and 74: IMPLEMENTATION TO THE MOCK-UP (PROT
Page 75 and 76: Explorative Investigation Approach
Page 77 and 78: unit, it is possible to define a co
Page 79 and 80: The proposed approach dealt with id
Page 81 and 82:
Fig.2. Measurement of reachability
Page 83 and 84:
Based on the experimental results,
Page 85 and 86:
to work individually or linked to e
Page 87 and 88:
SOME BIG PROJECTS ANALYSIS AND THEI
Page 89 and 90:
Dynamic construction visualizer Dyn
Page 91 and 92:
Fig.5. Workflow with augmentation d
Page 93 and 94:
sembled horizontally one by one on
Page 95 and 96:
olled to the next point, where the
Page 97 and 98:
olts was done manually in the origi
Page 99 and 100:
Pallet Circle “The skill is built
Page 101 and 102:
By the Standardization of construct
Page 103 and 104:
Assistant Bed - Solution to Patient
Page 105 and 106:
designed wheeled base is necessary.
Page 107 and 108:
together, and it is a very importan
Page 109 and 110:
CIB Mission Commissions we Members
Page 111:
CIB General Secretariat Kruisplein
show all

Automated Construction - Test Input

Create successful ePaper yourself

Delete template?

Save as template?