Partitioning Price List 2010 - Komfort
Partitioning Price List 2010 - Komfort
Partitioning Price List 2010 - Komfort
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Doors<br />
Sale Conditions<br />
Our standard stock doors are not sold as sequentially<br />
matched veneered sets. Custom made doors can be<br />
sequentially matched on request.<br />
In addition to the standard stock door veneers, the custom<br />
door range allows the specifier complete freedom to choose<br />
any veneers that are commercially available.<br />
Veneered doors are supplied with unlacquered concealed<br />
hardwood lippings to all edges and are colour co-ordinated<br />
to the specified veneer. Exposed lippings are available on<br />
request.<br />
The appearance of a veneered flush door may be further<br />
enhanced to the specifiers choice by the application of<br />
hardwood mouldings or the introduction of grooves into<br />
solid wood inlays.<br />
Standard stock and custom made doors are finished in UV<br />
cured clear lacquers.<br />
Application of stained lacquers to veneers is available<br />
on request.<br />
All laminate manufacturers’ ranges suitable for door fixings<br />
are available for <strong>Komfort</strong>’s custom doors with either<br />
exposed or concealed lippings.<br />
Door overpanels are supplied oversize to the door width<br />
to facilitate on site fitting.<br />
Credits will not be issued for doors that have already<br />
been hung.<br />
At the time of placing order, please supply confirmation<br />
of all special size requirements, veneers, veneer cutting,<br />
handling etc. to ensure compliance with current lead times.<br />
Other configurations and veneer cuts are available<br />
on request.<br />
No attempt should be made on-site to strip the lacquer<br />
and refinish.<br />
Confirmed orders for doors cannot be cancelled<br />
A CANCELLATION FEE OF 100% WILL BE APPLIED<br />
<strong>Komfort</strong> Fire Door Assurance Scheme<br />
Following the introduction of the Regulatory Reform<br />
(Fire Safety) Order on 1st October 2006 companies<br />
and individuals responsible for business premises are<br />
required to carry out a fire risk assessment.<br />
<strong>Komfort</strong> FD30 Fire Doors also carry installation instructions<br />
which should be adhered to in order to achieve the stated<br />
fire performance. The equivalent information for FD60<br />
doors is accessible on www.komfort.com/doors<br />
To assist the person responsible for identifying fire<br />
protection barriers, <strong>Komfort</strong> Fire Doors are now marked on<br />
the top edge of the door by means of a tamper proof label<br />
issued under the terms of a third party certificated fire<br />
performance scheme.<br />
The <strong>Partitioning</strong> <strong>Price</strong> <strong>List</strong> Effective from July <strong>2010</strong> 60