WSP-2718 Digital Satellite Relay Panels

Introducing the Douglas
WSP-2718 Digital
Satellite Relay Panels
An ideal lighting control panel for school classrooms,
lecture theaters and office tenant spaces.
• Eight 20 Amp lighting relays for 120V, 277V or
347V circuits.
• Reduced contractor branch circuit wiring.
• Designed to accept inputs from a variety of sources
including switches, photo sensors and occupancy
detectors with lockout logic provided.
• Optional emergency transfer devices (UL-924 type)
available.
• Satellite Panels are programmed via any PC that
has Internet browser software installed.
Page 1

W-2000
Lighting Control Networks
with Satellite Relay Panels
Master Lighting
Control Relay
Cabinet c/w
Network Manager
Lighting
Distribution
Panel
to next Satellite
Relay Panel
Classroom A
Classroom B
Remote
Satellite
Relay
Panels
Classroom C
Classroom D
data signal
WSP-2718 Satellite Panel Features
• Eight 20A 120/277/347VAC
latching relays that are rated
for lighting loads.
• Each relay has a built-in
manual ON/OFF lever for
easy control at the panel.
• Ten switch inputs. Each can
be set to control any relay
or group of relays in the
panel.
• Two digital photo sensor
inputs for Douglas sensors.
• Two 24VDC inputs and a
24VDC power supply to
accommodate any type of
24VDC occupancy detector.
• Each panel is equipped with a
buzzer that can be pinged to
establish location.
• Switch inputs can also be
programmed to control relays
in other panels.
• A photo sensor can be set so that
each lighting group can switch
ON/OFF at unique light levels.
• Photo sensor control can be
interlocked so that lights stay
OFF regardless of any other
control if the natural light level
is sufficient.
• Occupancy detector controls
can be disabled for “Quiet
Time” applications common
in schools.
• The Satellite Panel is part of
the W-2000 System. Panels
are programmed and set via
any PC that has an Internet
browser installed.
Constant Light Controller
Photo
Cell
Photo
Cell
Photo
Cell
Photo
Cell
Photo
Cell
Photo
Cell
Occ.
OFF
only
Sw.
Early Morning: 2 lamps ON
Morning: 1 lamp ON
Mid Day: No lamps ON
Afternoon: 1 lamp ON
Evening: 2 lamps ON
Night: 3 lamps ON
Unoccupied: No lamps ON
Page 2
www.DouglasLightingControls.com

WSP-2718 Satellite Panel Network
W-2000 Network
The panels are connected to
each other with a 2-conductor
data line. This forms the
backbone of the W-2000
system by providing an
address point for each relay.
The W-2000 family of
®
products uses the LonWorks
technology platform to provide
an open standard, nonproprietary
option for your
lighting control system.
Other building automation
systems that support lighting
controls using the LonMark
standards can integrate the
Douglas W-2000 panel
network as part of their
system.
Lighting
Distribution
Panel
Full-Sized Douglas Panels
• Capacity from 6 to 72 loads.
• Install by breaker panels.
LCP1 LCP2 LCP3
Satellite Panels
• Capacity for eight relays.
• Install each near loads being controlled.
Optional Data Line Switches
• System-wide programmable control.
Local
Hardwired
Switches
and
Devices
Configured by
a WNP-2150
Network
Manager
data signal
Telephone
Connection
Ethernet
Connection
Internet Browser Access
for Lighting Control
System View/Edit
Functions
Internet Access
WNP-2150 Network Manager settings are
viewed and edited with a standard Internet
browser. No proprietary software required.
User connection to the WNP-2150 can be
direct with an ethernet connection or
remote from a computer that is connected
to the Internet. Telephone access is
available for remote programming.
www.DouglasLightingControls.com
Page 3

WSP-2718 Satellite Panel
Lighting Control Products
WNP-2150 Network Manager
The WNP-2150 Network Manager connects to the Lighting Control panels via
the LonWorks data signal.
Connection to the WNP-2150 from a PC or LAN is via an ethernet connection.
The WNP-2150 can also be accessed via the optional telephone modem.
Network Lighting Control Scheduler
The WNP-2150 provides the link for control and programming by a PC.
Scheduler features include view & edit relay groups in a PC via any standard
Internet browser. Access is provided by a direct connection or via the Internet. Full
scheduling capability is available for weekly, holiday and special event formats.
Schedules support Flick Warn, Time Out, Delay OFF, Cleaning Mode and Disable
features. The system logs the last 255 events and permits diagnostics.
Douglas Low Voltage Switches
Douglas 2-Wire Switches
-LED or non-LED versions.
-Keyed switches.
-Push button switches with label.
Douglas Digital Switches
-LED indication.
-Push button style with label.
-Three switches per gang.
Photo Sensors
WPS-5533/WPS-5527
Photo sensors connect directly to the
Satellite Panel and vary output light
levels in response to changing
ambient light during the day.
WPS-5941/WPS-5951
Photo sensors connect into the W-2000
network, for system-wide switching
utilizing photocell control.
Occupancy Sensors
The Douglas WRM-5104 Ceiling-Mounted PIR Occupancy Sensor monitors a
360 O detection zone within a room with eight- to twelve-foot ceilings.
The sensor’s fresnel lens rotates and swivels to allow fine tuning of PIR detection
zones. The control switch under the front cover allows for ON/OFF or OFF-only mode.
Dimming Ballast Controls
The Douglas WPC-5700 Indoor Ambient Light Sensor dims up to 50 Industry-Standard
0-10V dimming ballasts in response to measured ambient light levels. The sensor can be
configured as a stand-alone device or as part of a time-controlled network.
The Douglas WPN-5721 Manual Dimming Ballast Controller is available as a convenient
local room override.
www.DouglasLightingControls.com
Page 4