brinkmann - Ramirent

3 Technical description
Automatic mixing tank
cleaner
BRINKMANN
MASCHINENFABRIK GMBH & CO. KG
The automatic mixing tank cleaner makes the daily task of cleaning the
tank easier and prevents material from setting and deposits from forming
in the mixing tank.
The mixing shaft is fi tted with two cleaning nozzles (1). Compressed air
keeps the nozzles free of deposits during a delivery cycle. During the
cleaning cycle, pressurised water is injected through the nozzles while
the mixing shaft rotates and cleans the inside of the mixing tank with
the same effi ciency as a high-pressure cleaner. Wear-resistant material,
a series-connected water fi lter and stabilising pressure valves ensure
maximum safety.
Simply connect the automatic mixing tank cleaner to the mains water
supply and switch on the water pump.
The machine operator can now quickly clean the mixing tank, even
between 2 delivery cycles. This facility is extremely useful, especially
when mixing quick-setting material, because it prevents deposits
from forming inside the mixing tank, which you would otherwise have
to laboriously scrape off to ensure correct functioning of the machine. A
cleaning lance can also be connected to clean the outside of the machine.
Water injected to clean the mixing tank can be
– used for subsequent material mixtures,
– pumped through the delivery hoses for cleaning,
– or drained via the mixing tank outlet.
Advantages:
– Increased safety for the machine operator because machine downtimes
(e.g. caused by deposits blocking the mixing shaft) and manual
cleaning of the mixing tank interior are largely eliminated.
– Simplifi ed cleaning
– Signifi cant decrease in cleaning time (approx. 30 minutes per day)
– Reduced maintenance costs because the removal of material from
the mixing tank prevents potential damage.
1 1
3 - 16 03DF001_0608_en