Manual
axun_platinum_invert..
axun_platinum_invert..
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PLATINUM inverter 2100 S, 3100 S, 3800 S, 4300 S, 4301 S, 4600 S, 4601 S<br />
Startup<br />
Language selection<br />
Key<br />
<br />
OK<br />
Select language.<br />
Accept selected language.<br />
Function<br />
After the configuration process has been started:<br />
the inverter scans the network connected by the EIA485-Bus for<br />
other inverters.<br />
all inverters connected to the network are blocked.<br />
EIA485 bus<br />
As long as the network scan (Scanning Network) is still in process, the<br />
display shows the following screen:<br />
When the network scan is completed, the display shows the number of<br />
detected bus participants. In case of a single inverter, the display shows<br />
01.<br />
Note<br />
The network scan can only recognize more than 1 inverter if the inverters<br />
are correctly networked via the EIA 485 interface.<br />
18 Installation and Operating <strong>Manual</strong>: PLATINUM inverter 2100 S, 3100 S, 3800 S, 4300 S, 4301 S, 4600 S, 4601 S<br />
Date 09/2008<br />
Mat.-No. 717 770
Change language