Manual

PLATINUM inverter 2100 S, 3100 S, 3800 S, 4300 S, 4301 S, 4600 S, 4601 S
Service
Isolation monitoring
The menu Insulation monitoring enables to check the insulation between
solar generator terminal and protective conductor.
Key
ESC
OK
Navigate within menu.
Back to Main Menu.
Accept selected mode.
Function
Note
Insulation monitoring is deactivated in the factory.
When the OK key is pressed, the inverter accepts the changed parameters.
Four operating modes are possible depending on the type of installation:
INSULATED
No connection installed between solar generator terminal and
protective conductor
MINUS GROUNDED
Negative terminal of the solar generator is connected to the protective
conductor
PLUS GROUNDED
Positive terminal of the solar generator is connected to thze protective
conductor
DEACTIVATED
Activate insulation monitoring
If the insulation monitoring is activated, the inverter constantly performs
the insulation monitoring.
46 Installation and Operating Manual: PLATINUM inverter 2100 S, 3100 S, 3800 S, 4300 S, 4301 S, 4600 S, 4601 S
Date 09/2008
Mat.-No. 717 770