OpenScape Office V3R3 Teleworker Interaction with ... - Unify

More documents

Recommendations

Info

OpenScape Office V3 Teleworker Interaction with Shrew Soft VPN Client The following steps describe how to connect a Teleworker set in the OpenScape Office MX V3 system with the Shrew Soft VPN client: Preconditions: On OpenScape Office MX systems iteret aess ust e ofigured as DSL at WAN Port directly. Otherise a VPN Connection wizard will not be available and below shown configuration cannot be performed. In case OpenScape Office MX is not configured with a fixed WAN-IP-address a dynamic DNS account like DynDNS or similar is needed to be able to use the functionality. Supported doai aes are listed ithi the Cofigure DDN“ Aout page of the Internet Configuration wizard. Notes: Tests done with Shrew Soft VPN Client version 2.1.7 Shrew Soft VPN Client can be downloaded from: http://www.shrew.net Tested on Microsoft Windows 7 and Microsoft Windows XP SP3 In this shown example configuration, also the value of a possible DNS server was set to 198.6.127.33 In this shown example configuration, the configured OpenScape Office MX system IP-address was set to 198.6.127.10 In this shown example configuration, the required virtual IP-address for the added Teleworker was set to value 192.168.111.222. This virtual IP-address is unique for each Teleworker that should be added to the system. Test done with an OpenScape Office MX running V3R3 software. Page 2 of 20
OpenScape Office V3 Teleworker Interaction with Shrew Soft VPN Client Please perform following steps to grant access to OpenScape Office MX V3 for a Teleworker using Shrew Soft VPN client: I the Ope“ape Offie Assistat aigate to „“etup and check configuration settings as described in the precondition details. This check can be done via Iteret Cofiguratio izard. Page 3 of 20
Page 4 and 5: OpenScape Office V3 Teleworker Inte
Page 20: About Unify Unify is one of the wor

OpenScape Office V3R3 Teleworker Interaction with ... - Unify

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?