OpenScape Office V3R3 Teleworker Interaction with ... - Unify

More documents

Recommendations

Info

OpenScape Office V3 Teleworker Interaction with Shrew Soft VPN Client I the Ope“ape Offie Assistat aigate to „“etup and open VPN Coetio izard. As shown in the screenshot above, there is no existing VPN configuration currently set & VPN is OFF. Please lik o the Cofiguratio of VPN-button and proceed with the following steps. In this configuration page please lik o the „Add-button. Page 4 of 20
OpenScape Office V3 Teleworker Interaction with Shrew Soft VPN Client At first system parameters of the OpenScape Office MX system have to be entered: System name: This name is a free name value that describes your system in one word. Comment: An optional field that may contain additional comments. Active: This checkbox must be set to enable the configuration. Remote Service Center: With this new OpenScape Office MX V3 parameter this VPN tunnel can be enabled with *995+PIN or disabled with #995+PIN. The required PIN can be set via Ope“ape Offie Assistat > “erie Ceter > Reote Aess > Code. If checkbox is set, the usage of service code *995/#995 will take effect on this VPN tunnel. This is an optional setting. Use Data of own System: If this checkbox is set, most of the fields below will be set with the from the before done internet access configuration values, like the DynDNS account. Address Type: Usage of this value depends if the system has a fixed ip-address for the internet configuration or if DynDNS is used. Global IP Address/DNS Name (WAN): Enter the fixed IP-address or DynDNS name. Local IP Address (LAN): Enter the local IP-address of the OpenScape Office MX. Local Subnet Mask (LAN): Enter the local subnet mask address of the OpenScape Office MX. Page 5 of 20
Page 2 and 3: OpenScape Office V3 Teleworker Inte
Page 20: About Unify Unify is one of the wor

OpenScape Office V3R3 Teleworker Interaction with ... - Unify

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?