A Starters Guide on Compression Moulding And Autoclave
This edition of Knowledge On-The-Go Special Supplement features two key machinery used in the rubber industry viz. Autoclave and Compression Moulding.
This edition of Knowledge On-The-Go Special Supplement features two key machinery used in the rubber industry viz. Autoclave and Compression Moulding.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
| AUTOCLAVE |<br />
temperature is reached, a timed soak<br />
at that temperature begins and runs for<br />
the necessary durati<strong>on</strong>. At the end of<br />
the soak period, the cooling functi<strong>on</strong><br />
brings the temperature down to a set<br />
value at a specified ramp rate. The<br />
vessel is depressurized and the<br />
circulati<strong>on</strong> stopped.<br />
Steam curing requires a great deal of<br />
manual work from <strong>on</strong>e processing<br />
stage to the other, and this also<br />
c<strong>on</strong>tributes to the high cost of your<br />
autoclave cured products.<br />
Hence, some of your new generati<strong>on</strong><br />
peers advocate the more advanced<br />
microwave process.<br />
Summarizing autoclaves are pressure<br />
vessels for rubber product<br />
vulcanizati<strong>on</strong>, available in a wide<br />
range of sizes. A disc<strong>on</strong>tinuous curing<br />
method, the curing of your rubber<br />
comp<strong>on</strong>ent takes place in a vessel<br />
(autoclave) where pressurized steam<br />
is the medium of heating.<br />
RMW<br />
Send Us Your Blog Suggesti<strong>on</strong> Or Your Article<br />
rubbermachineryworld@gmail.com<br />
22<br />
SELL MORE<br />
WHEN BUYERS VISIT FOR<br />
AUTHENTIC INFO ON MACHINERY<br />
Promote Your Brand On<br />
RUBBER Rubber<br />
Machinery<br />
World<br />
M<br />
M<br />
Special Supplement - Rubber Machinery World | OCT 2015