A200 - Electrical Part Manuals
A200 - Electrical Part Manuals
A200 - Electrical Part Manuals
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Field Modification Kits<br />
Mechanical latch Kit@<br />
The A201 l mechanical latch is designed for<br />
field mounting on 2 or 3 pole A201 and<br />
A202 contactors. In addition to providing a<br />
mechanically held contactor for applications<br />
requiring silent operation, it also provides<br />
circuit continuity during a low voltage condition.<br />
latching and unlatching may be ac<br />
complished either manually or electrically.<br />
Like the contactor coil, the latch coil is<br />
continuous duty rated at 11 VA close and<br />
95 VA open. The unlatching time is less<br />
than two cycles.<br />
On applications of a meChanical latch with<br />
a maintained contact pilot device scheme,<br />
an LC-56 coil clearing kit is required. This<br />
kit contains a delayed break normally closed<br />
contact block and an early make normally<br />
open contact block, each of which require<br />
one interlock cavity. The LC-56 coil clearing<br />
kit is designed to de-energize both the main<br />
contactor coil and the latch trip coil after<br />
these coils have performed their intended<br />
function.<br />
Contaclor<br />
Size<br />
Mechanical Latch Kit<br />
Kit<br />
Cat.<br />
List Price<br />
C10-S5<br />
00, 0, 1 A201 L1A $ 20<br />
2 A201L2A 60<br />
Coil Clearing Kit<br />
All LC-56 20<br />
® For coil voltages other than 120/60. see page 11. @ Mechanical latch lor sizes 3 and 4 must be factory<br />
installed.<br />
Normally Open, Normally Closed<br />
Power Pole Kits<br />
Each kit adds one normally open or one<br />
normally closed power pole to size 00<br />
through 2, A201 and A21 1, 2 or 3-pole<br />
contactors and A21 0 reversing starters with<br />
overload relays. These power poles are<br />
rated 600 volts Ac maximum with a continuous<br />
current rating of 18 amperes for<br />
the size 0 unit and 27 amperes for the size<br />
1 unit.<br />
Kits may be field mounted or factory installed<br />
in the lower interlock cavities. 8