15.12.2015 Views

Owner’s

1NPNM71

1NPNM71

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Audio System<br />

The multicast indicator appears in FM<br />

mode (only) if the current station is<br />

broadcasting multiple digital broadcasts.<br />

The highlighted numbers signify available<br />

digital channels where new or different<br />

content is available. HD1 signifies the main<br />

programming status and is available in<br />

analog and digital broadcasts. Other<br />

multicast stations (HD2 through HD7) are<br />

only available digitally.<br />

When HD Radio broadcasts are active, you<br />

can access the following functions:<br />

• Scan allows you to hear a brief<br />

sampling of all available stations. This<br />

feature still works when HD Radio<br />

reception is on, although it does not<br />

scan for HD2-HD7 channels. You may<br />

see the HD logo appear if the station<br />

has a digital broadcast.<br />

• Memory presets allow you to save an<br />

active channel as a memory preset.<br />

Touch and hold a memory preset slot<br />

until the sound returns. There is a brief<br />

mute while the radio saves the station.<br />

Sound returns when finished. When<br />

switching to an HD2 or HD3 memory<br />

preset, the sound mutes before the<br />

digital audio plays, because the system<br />

has to reacquire the digital signal.<br />

Note: As with any saved radio station, you<br />

cannot access the saved station if your<br />

vehicle is outside the station’s reception<br />

area.<br />

HD Radio Reception and Station Troubleshooting<br />

Potential reception issues<br />

Reception area<br />

Station blending<br />

If you are listening to a multicast station and you are on<br />

the fringe of the reception area, the station may mute due<br />

to weak signal strength.<br />

If you are listening to HD1, the system switches back to<br />

the analog broadcast until the digital broadcast is available<br />

again. However, if you are listening to any of the possible<br />

HD2-HD7 multicast channels, the station mutes and stays<br />

muted unless it is able to connect to the digital signal<br />

again.<br />

When the system first receives a station (aside from HD2-<br />

HD7 multicast stations), it first plays the station in the<br />

analog version. Once the receiver verifies the station is an<br />

HD Radio station, it shifts to the digital version. Depending<br />

on the station quality, you may hear a slight sound change<br />

when the station changes from analog to digital. Blending<br />

is the shift from analog to digital sound or digital back to<br />

analog sound.<br />

285<br />

Focus (CDH) Canada/United States of America, enUSA

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!