15.12.2015 Views

Owner’s

1NPNM71

1NPNM71

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Locks<br />

You will reactivate disabled intelligent<br />

access keys when you switch the ignition<br />

on using a valid key.<br />

Autolock Feature<br />

The autolock feature will lock all the doors<br />

when:<br />

• All doors are closed.<br />

• The ignition is on.<br />

• You shift into any gear putting your<br />

vehicle in motion.<br />

• Your vehicle reaches a speed greater<br />

than 4 mph (7 km/h).<br />

Autounlock Feature<br />

The autounlock feature will unlock all the<br />

doors when:<br />

• The ignition is on, all the doors are<br />

closed and your vehicle has been in<br />

motion at a speed greater than 4 mph<br />

(7 km/h).<br />

• Your vehicle comes to a stop and you<br />

switch the ignition off or to accessory.<br />

• You open the driver door within 10<br />

minutes of switching the ignition off or<br />

to accessory.<br />

Note: If you electronically lock your vehicle<br />

after you switch the ignition off with the<br />

driver door closed, the doors will not<br />

autounlock.<br />

Enabling or Disabling Autolock and<br />

Autounlock<br />

You can enable or disable the autolock and<br />

autounlock features independently of each<br />

other.<br />

To enable or disable autolock, do the<br />

following:<br />

1. Switch the ignition on.<br />

2. Press the power door unlock control<br />

three times.<br />

3. Switch the ignition off.<br />

4. Press the power door unlock control<br />

three times.<br />

5. Switch the ignition on. The horn sounds<br />

indicating your vehicle is in<br />

programming mode.<br />

6. Press the power door unlock control<br />

and within five seconds, press the<br />

power door lock control. The horn<br />

sounds once if disabled or twice if<br />

enabled.<br />

7. Switch the ignition off. The horn sounds<br />

indicating programming is complete.<br />

To enable or disable autounlock, do the<br />

following:<br />

1. Switch the ignition on.<br />

2. Press the power door unlock control<br />

three times.<br />

3. Switch the ignition off.<br />

4. Press the power door unlock control<br />

three times.<br />

5. Switch the ignition on. The horn sounds<br />

indicating your vehicle is in<br />

programming mode.<br />

6. Press the power door lock control and<br />

within five seconds, press the power<br />

door unlock control. The horn sounds<br />

once if disabled or twice if enabled.<br />

7. Switch the ignition off. The horn sounds<br />

indicating programming is complete.<br />

Illuminated Entry<br />

The interior lamps and select exterior<br />

lamps illuminate when you unlock the<br />

doors with the remote entry system.<br />

The lamps turn off if:<br />

• The ignition is on.<br />

• You press the remote control lock<br />

button.<br />

• 25 seconds have elapsed.<br />

66<br />

Focus (CDH) Canada/United States of America, enUSA

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!