KAR - Catalogue 2012

Live Centers - ECO-Line - Colour
Turning
GENERAL INFORMATION: High precision and coloured live centers with modern inclined ball bearings for high turning rates.
Optimal protection against splash and dirt.
Available in three versions: Type EN + normal spindle 60°
Type EV + extended spindle 60°
Type EB + pipe nose 60°
Sizes of Morse tapers from 2 to 6 in versions: Standard (STD) for normal loads and high turning rates
Super (SUP) for heavy duty work and low turning rates
MAINTENANCE: Maintenance free. The bearings are manufactured with continuous lubrication.
TURNING, MILLING & WORK HOLDING
Type EN
Morse Taper
Model
A
(mm)
ØB
(mm)
C
(mm)
ØD
(mm)
E
(mm)
Workpiece
Maximum
(kgs)
FA
daN
Maximum
RPM
1 1 SUP. 117 38 34.5 18.0 25.5 180 90 13500 826201
2 2 STD. 129 38 34.5 18.0 25.5 190 90 13500 826202
2 2 SUP. 141 45 40.5 25.0 31.5 280 115 12000 826203
3 3 STD. 158 45 40.5 25.0 31.5 280 115 12000 826204
3 3 SUP. 179 55 58.0 30.0 35.0 450 260 9800 826205
4 4 STD. 202 55 58.0 30.0 35.0 450 260 9800 826206
4 4 SUP. 216 70 64.5 40.0 42.5 700 440 7000 826207
5 5 STD. 243 70 64.5 40.0 42.5 700 440 7000 826208
5 5 SUP. 264 82 79.0 45.0 49.0 1000 925 5600 826209
6 6 STD. 318 82 79.0 45.0 49.0 1000 925 5600 826210
6 6 SUP. 356 110 107.5 46.5 58.5 1600 2450 4200 826211
Code
659
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca sales@kar.ca