KAR - Catalogue 2012

Dividing Heads and Indexing Spacers
Horizontal/Vertical Rotary Table
The work table is graduated 360 degrees around it’s circumference and is driven by a precision worm and gear providing a 90:1
reduction ratio. One turn of the handle moves the table through four degrees. The dial is graduated in divisions of 1 minute and the
vernier scale allows readings down to 10 seconds.
The worm is hardened and precision ground to minimize wear of the worm gear
Both the upper and lower surface of the rotary plates are precision ground
Operation and service manual included
OPTIONAL ACCESSORIES:
Tail Stock
Dividing Plate Set
3-Jaw Chuck
Model
D
Table
(mm)
H
Table
(mm)
Base
Dimension
A x B
(mm)
K
Bolt Slots
(mm)
Center
Sleeve
Worm Gear
Ratio
Weight
(kg)
HHV-400 400 140 510 x 435 18 MT5 90:1 130 277110
HHV-150 150 92 220 x 160 18 MT2 90:1 12.5 277106
HHV-200 200 120 310 x 225 18 MT3 90:1 31 277107
HHV-250 250 120 320 x 280 18 MT3 90:1 48.5 277108
HHV-300 300 140 140 x 325 18 MT4 90:1 77 277109
Code
TURNING, MILLING & WORK HOLDING
827
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca sales@kar.ca