KAR - Catalogue 2012

More documents

Recommendations

Info

Air Tools HAND, MARKING & AIR TOOLS Air Tapping Units A tapping machine for all general purpose tapping, from small sensitive non-ferrous products to heavy tapping in mild steel. Virtually eliminates the danger of tap breakage, even in blind holes by using tap clutch adapters. For safe, rapid and accurate tapping Parallel arm ensures tap alignment Easy operation, no experience or strength required Lower machining cost due to easy set-up and fast tapping ALL MACHINES INCLUDE: Parallel arm Air preparation unit with mist lubricator, fi lter and regulator Vertical motor mount Stationary bench bracket Air driven motor Quick change tooling adapter that accepts Bilz style tap adapters Each model includes six torque tap adapters with clutch Medium Duty Arm includes Bilz style clutch tap adapters: CWE #1 Sizes: #8, #10, 1/4, 5/16, 3/8, and 1/2 Tap Capacity Mild Steel Maximum Reach (Inch) Minimum Reach (Inch) RPM Torque at 90 PSI Code 0 - 1/2 36 6 400 29 ft. lbs. 302799 0 - 1/2 57 6 400 29 ft. lbs. 302800 Heavy Duty Arm includes Bilz style clutch tap adapters: CWE #2 Sizes: 5/16, 3/8, 7/16, 1/2, 5/8, and 3/4 Tap Capacity Mild Steel Maximum Reach (Inch) Minimum Reach (Inch) Variable RPM Torque at 90 PSI Code 0 - 3/4 76 8 150-400 29 ft. lbs. 302801 898 ENJOY QUALITY, VALUE AND BENEFITS - CALL <strong>KAR</strong> TODAY!
Air Tools Universal Tapping Attachments Enables tapping at any angle Range For Use on Tapping Unit Code 12-90º 302799; 302800 302803 20-90º 302801 302804 HAND, MARKING & AIR TOOLS Specifications: Free speed: 20,000 RPM Collet sizes: 1/8”, 1/4” Air inlet: 1/4” Length: 6.1” Weight: 1.23 lbs. Air consumption (25% SCFM): 4.3 Air pressure: 90 PSI Angle Die Grinder Model HY543 Code 460243 Collets for Model HY543 Diameter (Inch) Code 1/8 460246 1/4 460248 Specifications: Free speed: 25,000 RPM Capacity: 1/4” Air inlet (NPT): 1/4” Length: 5-1/2” Air consumption: 4 CFM Air pressure: 90 PSI Side to center: 1.34” 1/4” Front Exhaust Die Grinder Code 460242 899 Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca sales@kar.ca
Page 2 and 3:
Since 1954 Visit us online at www.k
Page 4 and 5:
Since 1954 Buy from KAR, the Toolin
Page 6 and 7:
Drills CUTTING TOOLS Jobber Length
Page 8 and 9:
Drills CUTTING TOOLS Size Decimal F
Page 10 and 11:
Drills CUTTING TOOLS Size Decimal E
Page 12 and 13:
Page 14 and 15:
Drills CUTTING TOOLS 10 Jobber Leng
Page 16 and 17:
Drills CUTTING TOOLS Metric Jobber
Page 18 and 19:
Drills CUTTING TOOLS Metric Jobber
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Drills Jobber Length Drills - Gold-
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Drills Jobber Length Drills - Slow
Page 34 and 35:
Page 36 and 37:
Drills Jobber Length Drills - Autom
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Drills CUTTING TOOLS Size (mm) Metr
Page 44 and 45:
Drills CUTTING TOOLS Left Hand Dril
Page 46 and 47:
Drills CUTTING TOOLS Left Hand Dril
Page 48 and 49:
Drills CUTTING TOOLS Screw Machine
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Drills Metric Screw Machine Length
Page 56 and 57:
Drills CUTTING TOOLS Taper Length D
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Drills Extra Length Drills CUTTING
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Drills CUTTING TOOLS 66 Size Decima
Page 72 and 73:
Drills CUTTING TOOLS Reduced Shank
Page 74 and 75:
Drills Reduced Shank Drill Sets CUT
Page 76 and 77:
Page 78 and 79:
Drills CUTTING TOOLS Core Drills St
Page 80 and 81:
Page 82 and 83:
Drills Body Drills CUTTING TOOLS Si
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Drills CUTTING TOOLS Diameter (mm)
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Drills CUTTING TOOLS Oil Hole Drill
Page 100 and 101:
Drills Combined Drills and Counters
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Drills CUTTING TOOLS Standard Step
Page 108 and 109:
Drills CUTTING TOOLS Self Starting
Page 110 and 111:
Drills CNC Spotting Drills CUTTING
Page 112 and 113:
Page 114 and 115:
Drills MULTI-V Drill Mill Multi-Fun
Page 116 and 117:
Drills Chamfering Biconical Cutters
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Drills CUTTING TOOLS Size Shank Siz
Page 124 and 125:
Drills CUTTING TOOLS Drill Decimal
Page 126 and 127:
Drills CUTTING TOOLS Drill Sets Tap
Page 128 and 129:
Drills CUTTING TOOLS Drill Sets Job
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Drills CUTTING TOOLS Drill Sets Met
Page 136 and 137:
Drills CUTTING TOOLS Drill Sets Scr
Page 138 and 139:
Drills CUTTING TOOLS Drill Sets 1/2
Page 140 and 141:
Drills CUTTING TOOLS Drill Sets For
Page 142 and 143:
Drills CUTTING TOOLS Drill Sets Tap
Page 144 and 145:
Drills CUTTING TOOLS Drill Sets Ext
Page 146 and 147:
Drills CUTTING TOOLS Drill Indexes
Page 148 and 149:
Drills CUTTING TOOLS • Made from
Page 150 and 151:
Drills CUTTING TOOLS Drill and Ream
Page 152 and 153:
Drills CUTTING TOOLS Rod Diameter (
Page 154 and 155:
OFFERT CHEZ KAR “ENGINEER’S BLA
Page 156 and 157:
CUTTING TOOLS Drills 150 Series Min
Page 158 and 159:
CUTTING TOOLS Drills 152 Series Min
Page 160 and 161:
CUTTING TOOLS Drills Series Min. to
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
CUTTING TOOLS Drills Series Shank D
Page 168 and 169:
CUTTING TOOLS Drills Series F Morse
Page 170 and 171:
Drills CUTTING TOOLS Spade Drill In
Page 172 and 173:
Reamers CUTTING TOOLS Size Decimal
Page 174 and 175:
Reamers Chucking Reamers CUTTING TO
Page 176 and 177:
Reamers CUTTING TOOLS Size Decimal
Page 178 and 179:
Reamers CUTTING TOOLS Diameter Shan
Page 180 and 181:
Reamers CUTTING TOOLS Chucking Ream
Page 182 and 183:
Reamers CUTTING TOOLS 176 Reamer De
Page 184 and 185:
Reamers CUTTING TOOLS 178 Reamer De
Page 186 and 187:
Reamers CUTTING TOOLS Chucking Ream
Page 188 and 189:
Reamers Micro Reamers CUTTING TOOLS
Page 190 and 191:
Reamers CUTTING TOOLS Diameter (mm)
Page 192 and 193:
Reamers CUTTING TOOLS Full Diameter
Page 194 and 195:
Reamers CUTTING TOOLS Size (Inch) S
Page 196 and 197:
Reamers Shell Reamers CUTTING TOOLS
Page 198 and 199:
Counterbores and Countersinks CUTTI
Page 200 and 201:
Page 202 and 203:
Counterbores and Countersinks Cap S
Page 204 and 205:
Counterbores and Countersinks Count
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Taps, Dies and Threading CUTTING TO
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Taps, Dies and Threading Screw Extr
Page 248 and 249:
Milling Cutters and Saws CUTTING TO
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Voir “Cutting Tools” See Cuttin
Page 272 and 273:
End Mills and Routers CUTTING TOOLS
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
End Mills and Routers PMX - TiAlN E
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
CUTTING TOOLS End Mills and Routers
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
End Mills and Routers Miniature End
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
CUTTING TOOLS Boring Bars Boring Ba
Page 336 and 337:
CUTTING TOOLS Boring Bars Tool No.
Page 338 and 339:
Page 340 and 341:
CUTTING TOOLS Boring Bars Grooving
Page 342 and 343:
Page 344 and 345:
CUTTING TOOLS Boring Bars ASB and
Page 346 and 347:
Boring Bars CUTTING TOOLS Boring Ba
Page 348 and 349:
Boring Bars CUTTING TOOLS Minimum D
Page 350 and 351:
Broaches Broach Sets CUTTING TOOLS
Page 352 and 353:
Broaches Broach Sets CUTTING TOOLS
Page 354 and 355:
Broaches Broach Bushings CUTTING TO
Page 356 and 357:
Broaches Broach Shims - Metric CUTT
Page 358 and 359:
Broaches Square Broaches CUTTING TO
Page 360 and 361:
Broaches Production Broaches CUTTIN
Page 362 and 363:
Broaches CUTTING TOOLS Broach Size
Page 364 and 365:
Deburring Tools and Burrs SET M - T
Page 366 and 367:
Deburring Tools and Burrs Set G3 -
Page 368 and 369:
Deburring Tools and Burrs Set TD -
Page 370 and 371:
Deburring Tools and Burrs Set U - U
Page 372 and 373:
CUTTING TOOLS Deburring Tools and B
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Deburring Tools and Burrs CUTTING T
Page 390 and 391:
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Tool Bits, Blanks and Knurling Tool
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Hole Cutters CUTTING TOOLS Holde
Page 414 and 415:
Hole Cutters CUTTING TOOLS Hole C
Page 416 and 417:
Des produits de qualité fabriqués
Page 418 and 419:
Turning External Tool Holders INDEX
Page 420 and 421:
Turning INDEXABLE CUTTING TOOLS Ext
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Turning Boring Bars INDEXABLE CUTTI
Page 434 and 435:
Turning INDEXABLE CUTTING TOOLS Bor
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Turning INDEXABLE CUTTING TOOLS Coo
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Turning INDEXABLE CUTTING TOOLS Min
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Turning Turning Inserts INDEXABLE C
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Turning INDEXABLE CUTTING TOOLS Tur
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
Page 524 and 525:
Page 526 and 527:
Page 528 and 529:
Page 530 and 531:
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556 and 557:
Grooving, Parting and Threading IND
Page 558 and 559:
Page 560 and 561:
Grooving, Parting and Threading Gro
Page 562 and 563:
Page 564 and 565:
Page 566 and 567:
Grooving, Parting and Threading Gro
Page 568 and 569:
Page 570 and 571:
Page 572 and 573:
Page 574 and 575:
Page 576 and 577:
Page 578 and 579:
Page 580 and 581:
Page 582 and 583:
Page 584 and 585:
Page 586 and 587:
Page 588 and 589:
Page 590 and 591:
Milling Milling INDEXABLE CUTTING T
Page 592 and 593:
Milling INDEXABLE CUTTING TOOLS Typ
Page 594 and 595:
Page 596 and 597:
Page 598 and 599:
Milling INDEXABLE CUTTING TOOLS Loc
Page 600 and 601:
Page 602 and 603:
Page 604 and 605:
Page 606 and 607:
Milling INDEXABLE CUTTING TOOLS Fac
Page 608 and 609:
Page 610 and 611:
Page 612 and 613:
Page 614 and 615:
Page 616 and 617:
Page 618 and 619:
Milling INDEXABLE CUTTING TOOLS Cha
Page 620 and 621:
Milling Milling Inserts INDEXABLE C
Page 622 and 623:
Milling Milling Inserts INDEXABLE C
Page 624 and 625:
Milling INDEXABLE CUTTING TOOLS Mil
Page 626 and 627:
Page 628 and 629:
Page 630 and 631:
Page 632 and 633:
Page 634 and 635:
Page 636 and 637:
Thread Milling Thread Milling INDEX
Page 638 and 639:
Thread Milling INDEXABLE CUTTING TO
Page 640 and 641:
Page 642 and 643:
Page 644 and 645:
Page 646 and 647:
Page 648 and 649:
Page 650 and 651:
Indexable Cutting Tools Technical I
Page 652 and 653:
Indexable Cutting Tools Technical I
Page 654 and 655:
Abrasives Mounted Flap Wheels ABRAS
Page 656 and 657:
Abrasives ABRASIVES, FILES & GRINDI
Page 658 and 659:
Abrasives ABRASIVES, FILES & GRINDI
Page 660 and 661:
Abrasives & Files Tetrabor Hand Lap
Page 662 and 663:
If you can’t find a product, or r
Page 664 and 665:
TURNING, MILLING & WORK HOLDING Tur
Page 666 and 667:
Turning Live Centers - Main Line TU
Page 668 and 669:
Page 670 and 671:
Turning Live Centers - ECO-Line - C
Page 672 and 673:
Turning Live Centers - Bull Nose TU
Page 674 and 675:
Turning Live Centers - Heavy-Duty S
Page 676 and 677:
Turning Live Centers - Super Precis
Page 678 and 679:
Turning Dead Centers TURNING, MILLI
Page 680 and 681:
Turning Dead Centers - With Nut TUR
Page 682 and 683:
Turning TURNING, MILLING & WORK HOL
Page 684 and 685:
Turning Live Centers - High RPM Spr
Page 686 and 687:
Turning Live Centers - CNC Heavy Du
Page 688 and 689:
Turning Lathe Chuck Grease TURNING,
Page 690 and 691:
Turning Lathe Chucks TURNING, MILLI
Page 692 and 693:
Page 694 and 695:
Page 696 and 697:
Page 698 and 699:
Turning Rotating Chucks TURNING, MI
Page 700 and 701:
Page 702 and 703:
Page 704 and 705:
Page 706 and 707:
Turning Lathe Chuck Accessories TUR
Page 708 and 709:
Page 710 and 711:
Page 712 and 713:
Page 714 and 715:
Page 716 and 717:
Page 718 and 719:
Page 720 and 721:
Page 722 and 723:
Page 724 and 725:
Page 726 and 727:
Page 728 and 729:
Page 730 and 731:
Page 732 and 733:
Page 734 and 735:
Page 736 and 737:
Turning CNC ACCU-Length Collet Chuc
Page 738 and 739:
Turning 16C Collets TURNING, MILLIN
Page 740 and 741:
Turning Chuck Stop Sets TURNING, MI
Page 742 and 743:
Page 744 and 745:
Page 746 and 747:
Page 748 and 749:
Page 750 and 751:
Page 752 and 753:
Page 754 and 755:
Page 756 and 757:
Page 758 and 759:
Turning CNC Bar Pullers TURNING, MI
Page 760 and 761:
Page 762 and 763:
Page 764 and 765:
Milling TURNING, MILLING & WORK HOL
Page 766 and 767:
Milling TG Collets TURNING, MILLING
Page 768 and 769:
Page 770 and 771:
Page 772 and 773:
Page 774 and 775:
Page 776 and 777:
Page 778 and 779:
Milling Fullgrip Collet Chucks TURN
Page 780 and 781:
Milling Fullgrip Collets TURNING, M
Page 782 and 783:
Milling Double Angle Collet Extensi
Page 784 and 785:
Page 786 and 787:
Page 788 and 789:
Page 790 and 791:
Page 792 and 793:
Page 794 and 795:
Page 796 and 797:
Page 798 and 799:
Page 800 and 801:
Page 802 and 803:
Page 804 and 805:
Milling Taper Socket Cleaning Tools
Page 806 and 807:
COLOUR BAND TAPS PAGES 212-222 YELL
Page 808 and 809:
Machine Accessories TURNING, MILLIN
Page 810 and 811:
Machine Accessories Collets TURNING
Page 812 and 813:
Page 814 and 815:
Page 816 and 817:
Page 818 and 819:
Page 820 and 821:
TURNING, MILLING & WORK HOLDING Vis
Page 822 and 823:
Vises and Accessories Multi-Power C
Page 824 and 825:
Vises and Accessories Precision Ang
Page 826 and 827:
Vises and Accessories Modular Syste
Page 828 and 829:
Vises and Accessories Machine Vise
Page 830 and 831:
Vises and Accessories TURNING, MILL
Page 832 and 833:
Vises and Accessories TURNING, MILL
Page 834 and 835:
Dividing Heads and Indexing Spacers
Page 836 and 837:
Page 838 and 839:
Page 840 and 841:
Clamping Components Toe Clamps TURN
Page 842 and 843:
TURNING, MILLING & WORK HOLDING Cla
Page 844 and 845:
Page 846 and 847:
Page 848 and 849:
Page 850 and 851:
Page 852 and 853:
Clamping Components TURNING, MILLIN
Page 854 and 855:
Page 856 and 857:
Clamping Components Screw Jack Pads
Page 858 and 859:
Page 860 and 861:
Page 862 and 863: Clamping Components TURNING, MILLIN
Page 864 and 865: Clamping Components Horizontal Hand
Page 866 and 867: Clamping Components Push/Pull Toggl
Page 868 and 869: Clamping Components Toggle Pliers T
Page 874 and 875: Voir “Cutting Tools” See Cuttin
Page 876 and 877: TURNING, MILLING & WORK HOLDING Dri
Page 878 and 879: TURNING, MILLING & WORK HOLDING Dri
Page 880 and 881: Drilling TURNING, MILLING & WORK HO
Page 882 and 883: Drilling Drill Chuck Arbors TURNING
Page 888 and 889: Tapping TURNING, MILLING & WORK HOL
Page 896 and 897: Boring TURNING, MILLING & WORK HOLD
Page 898 and 899: TURNING, MILLING & WORK HOLDING Flu
Page 904 and 905: Fluid Accessories TURNING, MILLING
Page 906 and 907: Fluid Accessories Pneuvac Pump TURN
Page 908 and 909: Wrenches TORX® Wrenches HAND, MARK
Page 910 and 911: HAND, MARKING & AIR TOOLS Marking E
Page 914 and 915: Air Tools HAND, MARKING & AIR TOOLS
Page 916 and 917: Punch Formers, Punches and Scribers
Page 928 and 929: MEASURING TOOLS & INSPECTION INSTRU
Page 954 and 955: Indicators MEASURING TOOLS & INSPEC
Page 958 and 959: Indicators Steel Indicator Extensi
Page 960 and 961: Indicators MEASURING TOOLS & INSPEC
Page 962 and 963:
MEASURING TOOLS & INSPECTION INSTRU
Page 964 and 965:
Page 966 and 967:
Test Indicators MEASURING TOOLS & I
Page 968 and 969:
Page 970 and 971:
Page 972 and 973:
Page 974 and 975:
Magnetic Stands and Holders MEASURI
Page 976 and 977:
Page 978 and 979:
Page 980 and 981:
Page 982 and 983:
Gage Blocks MEASURING TOOLS & INSPE
Page 984 and 985:
Page 986 and 987:
Page 988 and 989:
Squares MEASURING TOOLS & INSPECTIO
Page 990 and 991:
Page 992 and 993:
Page 994 and 995:
Page 996 and 997:
Page 998 and 999:
Gages MEASURING TOOLS & INSPECTION
Page 1000 and 1001:
Page 1002 and 1003:
Rules & Straight Edges Steel Rule M
Page 1004 and 1005:
Page 1006 and 1007:
Surface Roughness MEASURING TOOLS &
Page 1008 and 1009:
Page 1010 and 1011:
Page 1012 and 1013:
Page 1014 and 1015:
Surface Plates Granite Surface Plat
Page 1016 and 1017:
Loupes and Magnifiers Loupes MEASUR
Page 1018 and 1019:
QUALITY - VALUE - INNOVATION Contac
Page 1020 and 1021:
Magnetic Chucks Rectangular Magneti
Page 1022 and 1023:
Magnetic Chucks Magnetic Chucks for
Page 1024 and 1025:
Magnetic Tools Lifting Magnets MAGN
Page 1026 and 1027:
Permanent and Welding Magnets MAGNE
Page 1028 and 1029:
Page 1030 and 1031:
Page 1032 and 1033:
Your #1 Choice for Cutting Tools an
Page 1034 and 1035:
Angle Plates SET-UP TOOLS & THREAD
Page 1036 and 1037:
Angle Plates SET-UP TOOLS & THREAD
Page 1038 and 1039:
Blocks and Parallels SET-UP TOOLS &
Page 1040 and 1041:
Blocks and Parallels Parallels SET-
Page 1042 and 1043:
Blocks and Parallels SET-UP TOOLS &
Page 1044 and 1045:
SET-UP TOOLS & THREAD REPAIR Blocks
Page 1046 and 1047:
Set-Up Wheel Dresser and Replacemen
Page 1048 and 1049:
► Records pictures and video ►
Page 1050 and 1051:
Key Stock and Shim Stock SET-UP TOO
Page 1052 and 1053:
Key Stock and Shim Stock SET-UP TOO
Page 1054 and 1055:
Drill Rods SET-UP TOOLS & THREAD RE
Page 1056 and 1057:
Thread Inserts Re-Nu Thread Inserts
Page 1058 and 1059:
Plungers and Plunger Wrenches Threa
Page 1060 and 1061:
Authorized Supplier of... ® INTERN
Page 1062 and 1063:
REFERENCE Reference A complete refe
Page 1064 and 1065:
Reference Cutting Speed Conversions
Page 1066 and 1067:
Reference Tap Drill Sizes for Formi
Page 1068 and 1069:
SPADE BITS AND HOLDERS T15 AND M4 S
Page 1070 and 1071:
INDEX - Boring Bars (continued) to
Page 1072 and 1073:
INDEX - Collet Chucks (continued) t
Page 1074 and 1075:
INDEX - Drills (continued) Aircraft
Page 1076 and 1077:
INDEX - Drills (continued) Longboy
Page 1078 and 1079:
INDEX - End Mills (continued) EMP01
Page 1080 and 1081:
INDEX - Grooving (continued) to Lat
Page 1082 and 1083:
INDEX - Magnets (continued) Measuri
Page 1084 and 1085:
INDEX - Milling Cutters (continued)
Page 1086 and 1087:
INDEX - Shell Mill Arbors (continue
Page 1088 and 1089:
INDEX - Tool Posts (continued) to Z
Page 1090 and 1091:
Conditions de vente Juillet 2012 PR
Page 1092:
Toronto 6877 Edwards Boulevard Miss
show all

KAR - Catalogue 2012

Create successful ePaper yourself

Delete template?

Save as template?