KAR - Catalogue 2012

Clamping Components
Metric Clamping Components
T-Slot Nuts
To keep from damaging the T-Nut, the mating thread must be threaded as far as
possible into the T-Nut.Standard T-Slot Nuts have an incomplete thread in the base
to eliminate any danger of screwing the stud through the nut and damaging the
machine table.
B
Table
Slot
A
Thread
Size
E
(mm)
D
(mm)
C
(mm)
F
Length
(mm)
Code
10 M8 x 1.25 16.0 6 12.7 22 217601
12 M10 x 1.50 22.0 7 12.7 22 217602
14 M12 x 1.75 22.0 8 16.0 29 217603
16 M12 x 1.75 25.4 9 16.0 29 217604
18 M16 x 2.00 31.7 11 19.0 32 217605
20 M16 x 2.00 31.7 12 25.4 38 217606
Flanged Nuts
UNC
Heat treated steel with black oxide fi nish for long life under repeated usage
Flange provides large bearing surface and reduces chance of possible damage
to part being clamped
A
B
C
D
E
Thread Size (mm) (mm) (mm) (mm)
Code
M8 x 1.25 19.0 9.5 2.4 14.3 217607
M10 x 1.50 22.2 12.7 3.2 17.4 217608
M12 x 1.75 28.5 17.4 4.0 22.2 217609
M16 x 2.00 35.0 20.6 4.7 27.0 217610
A
Thread Size
B
Hex AF
(mm)
C
Length
(mm)
Coupling Nuts
Heat treated steel with black oxide fi nish for long life under repeated usage
Coupling nut allows studs to be joined together to create desired length
Code
M8 x 1.25 14.3 22 217611
M10 x 1.50 17.4 25 217612
M12 x 1.75 22.2 32 217613
M16 x 2.00 27.0 41 217614
TURNING, MILLING & WORK HOLDING
Clamping Sets
Table Mount
Model CK
Model
Table Slot
Block Width
Stud Size
(Inch)
(Inch)
Code
500CK 1/2 3/8 - 16 1 400005
625CK 5/8 1/2 - 13 1 400015
750CK 3/4 5/8 - 11 1 400025
812CK 13/16 3/4 - 10 1-1/2 400035
875CK 7/8 3/4 - 10 1-1/2 400040
12982CK 1 7/8 - 9 2 400045
Wall Mount
Model CKM
Model
Table Slot
Block Width
Stud Size
(Inch)
(Inch)
Code
500CKM 1/2 3/8 - 16 1 400010
625CKM 5/8 1/2 - 13 1 400020
750CKM 3/4 5/8 - 11 1 400030
839
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca sales@kar.ca