Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Limit Chain Quick<br />
Adjust With Belleville Spring<br />
WEHWM2691250A<br />
Chain length adjustment is quick and simple by pulling a pin,<br />
moving to the next hole and inserting the pin. No special tools<br />
required. Aluminum with the Belleville Spring for 1-1/4" tube.<br />
Adjustable Angled Throttle Pedal<br />
WEHWM111<br />
Smooth acceleration is assured with this fully<br />
adjustable non-slip pedal assembly that incorporates<br />
a bronze bushing design and delrin toe rollers. The<br />
foot pedal slides on a hex shaft and the upright to<br />
the carb turns on a thread. Designed to fit angled<br />
fi r e w a l l s .<br />
Aluminum Pinion Mount Climber Gear Kit<br />
WEHWM205BK<br />
Kit includes all the climber gear, back nut<br />
and the bolt for Wehrs Machine aluminum<br />
pinion mounts.<br />
EGR Block Off Plate<br />
WEHWM232<br />
General Motors intake block off plate.<br />
Hood Pin With Flange<br />
WEHWM2592<br />
1/2"-20 fine thread, lightweight, gun drilled hood pin with flange. Sold<br />
each. 2.0" long.<br />
Limit Chain Quick<br />
Adjust Without Belleville Spring<br />
WEHWM269150S<br />
Chain length adjustment is quick and simple by pulling a<br />
pin, moving to the next hole and inserting the pin. No special<br />
tools required. Made of steel with no Belleville Spring to make it<br />
IMCA legal. 1-1/2" tube.<br />
Inner Tie Rod Stud<br />
WEHWM325<br />
Replaces stock inner tie rod allowing a 5/8"<br />
heim on both ends of the steering arm.<br />
Rear End Drain Pan<br />
WEHWM330<br />
Wide design with specific locations to<br />
drain gears, stand up rear end cover and<br />
keep attaching hardware. Pour spout with<br />
shut off valve takes the mess out of emptying<br />
drain pan.<br />
Replacement Components For Dual Bearing Slider<br />
Hood Pin Scuff Plate<br />
WEHWM201<br />
Super lightweight 1/<strong>16</strong>" thick aluminum scuff plate<br />
fits 1/2" hood pins. Sold each.<br />
WEHWM251-5 WEHWM251-6 WEHWM251-7 WEHWM251-8<br />
Fox Shock Wrench<br />
WEHWM321<br />
Pistol grip wrench makes it much<br />
easier to rebuild Fox shocks.<br />
Part No. Description Price<br />
WEHWM251-5 Removable Spring Cup with Clip<br />
WEHWM251-6<br />
WEHWM251-7<br />
WEHWM251-8<br />
WEHWM251-15<br />
Spring Cup for Adjuster Nut Side<br />
Adjuster Nut With Lock<br />
Lock Kit With Bolt and Pin<br />
Stack Spring Adapter Cup<br />
12