Installation Guide

More documents

Recommendations

Info

Overview Cover View 1. Dome cover Vandal resistant dome cover. 2. Surface mount adapter Used to mount the dome camera to a wall, ceiling or electrical box. 3. Tamper resistant screws Torx captive screws to fix the dome cover to the base. 4. Side cable entry cover Covers the side cable entry hole. Overview 1
Mounting Adapter View 1. Lanyard Connects to the lanyard anchor on the dome camera base. 2. Camera housing clips Snaps to hold camera module during installation. 3. Cable entry hole An entry hole for the cables required for camera operation. 4. Mounting holes Holes for mounting the adapter to the following: A — UK standard single gang box B — Octagon gang box D — US standard single gang box Mounting Adapter View 2
Page 1 and 2: Installation Guide Avigilon H4 SL D
Page 3 and 4: This Class B digital apparatus comp
Page 5: Table of Contents Overview 1 Cover
Page 9 and 10: Camera Base Front View 1. IR illumi
Page 11 and 12: Installation Required Tools and Mat
Page 13 and 14: 1. Remove the sealing grommet from
Page 15 and 16: 4. Depending on the conduit used, m
Page 17 and 18: 5. Drive 4 screws to fasten the mou
Page 19 and 20: (Optional) Using the USB Wi-Fi Adap
Page 21 and 22: 4. Rotate the azimuth control ring
Page 23 and 24: For More Information Additional inf
Page 25 and 26: Removing the Dome Camera from the M
Page 27 and 28: Setting the IP Address Using the AR
Page 29 and 30: Certifications Certifications Safet

Installation Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?