Installation Guide

More documents

Recommendations

Info

Camera Base Bottom View 1. Cable entry hole An entry hole for the cables required for camera operation. 2. Lanyard anchor The safety lanyard attaches to the anchor to prevent the camera from falling during installation. 3. Vent Vent to allow moisture vapor to escape the sealed housing and equalize pressure. Camera Base Bottom View 3
Camera Base Front View 1. IR illuminator Provides scene illumination in the IR spectrum. 2. Ethernet port Accepts power and Ethernet connection to the network. The camera can only be powered by Power over Ethernet (PoE). Server communication and image data transmission also occur over this connection. 3. Connection status LED Provides information about camera operation. For more information, see LED Indicators on page 19. 4. Link LED Indicates if there is an active connection in the Ethernet port. 5. microSD card slot Accepts a microSD card for onboard storage. Camera Base Front View 4
Page 1 and 2: Installation Guide Avigilon H4 SL D
Page 3 and 4: This Class B digital apparatus comp
Page 5 and 6: Table of Contents Overview 1 Cover
Page 7: Mounting Adapter View 1. Lanyard Co
Page 11 and 12: Installation Required Tools and Mat
Page 13 and 14: 1. Remove the sealing grommet from
Page 15 and 16: 4. Depending on the conduit used, m
Page 17 and 18: 5. Drive 4 screws to fasten the mou
Page 19 and 20: (Optional) Using the USB Wi-Fi Adap
Page 21 and 22: 4. Rotate the azimuth control ring
Page 23 and 24: For More Information Additional inf
Page 25 and 26: Removing the Dome Camera from the M
Page 27 and 28: Setting the IP Address Using the AR
Page 29 and 30: Certifications Certifications Safet

Installation Guide

Create successful ePaper yourself

Delete template?

Save as template?