GT Designer3 Version1 Screen Design Manual (Functions)

Example) When multiple actions including followings are set for a touch switch.
Bit Alternate : M100
Screen switching : Screen changes to base screen 2 when M100 turns ON.
Screen switching : Screen changes to base screen 1 when M100 turns OFF.
(a) Action when GS450.b12 is ON.
After the bit set/reset/alternate is executed, the screen or station number is switched when the touch switch
is released, and the GOT operates with the values after the bit set/reset/alternate is executed.
Base screen 50 Base screen 2 Base screen 2 Base screen 1
M100 M100 M100 M100
M100 turns ON when
the touch switch is touched.
(b) Action when GS450.b12 is OFF.
The screen or station number is switched simultaneously to the execution of bit set/reset/alternate, and the
GOT operates with the values before the bit set/reset/alternate is executed.
Base screen 50
The screen changes when
the touch switch is released.
M100 turns OFF when the
touch switch is touched again.
The screen changes when
the touch switch is released.
Base screen 1 Base screen 1 Base screen 2
M100 M100 M100
M100 turns ON and the screen
changes when the touch switch is touched.
(The operation is based on the value (M100:
OFF) before the bit Alternate is executed.)
M100
M100 turns OFF and the screen
changes when the touch switch is touched.
(The operation is based on the value (M100:
ON) before the bit Alternate is executed.)
2.11 Precautions
2 - 79
1
FIGURES
2
TOUCH SWITCH
3
LAMP
4
GRAPHIC
CHARACTERS
5
NUMERICAL
DISPLAY/
NUMERICAL INPUT
6
ASCII DISPLAY/
ASCII INPUT
7
DATA LIST
8
HISTORICAL DATA
LIST DISPLAY