GT Designer3 Version1 Screen Design Manual (Functions)

HINT
To match the user alarm display with details screen:
The comment on the user alarm cannot be changed by using [Detail No. Offset].
The offset value for comment No. (Basic comment) on the user alarm is specified in [Comment No. Offset] on the
[Extended] tab. ( 11.6.1 Settings)
Match display the user alarm with the comment on the details screen by using [Detail No. Offset] and [Comment
No. Offset].
(4) Display method
Select the method for details display from the following two types.
(a) Single Touch Operation ( 11.6.1 Settings)
Touch the user alarm directly to display the detailed information.
(b) Touch switch ( 11.6.4 Useful operations and functions)
Create touch switches for user alarm to display the detailed information.
04/6/1 16:13:01 Temp. error
04/6/1 15:51:38 Fuse error
04/6/1 10:25:16 Oil error
Cursor ON Up Detail
Delete
Down
Display the cursor
11 - 208 11.6 User Alarm Display
Temperature error at
the power supply
module on Line 1
04/6/1 16:13:01 Temp. error
04/6/1 15:51:38 Fuse error
04/6/1 10:25:26 Oil error
04/6/1 16:13:01 Temp. error
04/6/1 15:51:38 Fuse error
04/6/1 10:25:16 Oil error
Cursor ON Up Detail
Delete
Down
Move (up/down) the cursor to
the alarm for details display.
04/6/1 16:13:01 Temp. error
Replace the fuse at
the 04/6/1 power 15:51:38 supply Fuse error
module 04/6/1 10:25:16 on Line Oil 1.
error
Display Up Detail
Delete
Down
Display the detailed information